Document restoration >> Do It Yourself Restoration Of Mold Damage On Paper

Although it is neither necessary nor desirable to remove all dirt or discoloration from old papers, surface cleaning sometimes improves the appearance of an artifact. Surface cleaning can also remove substances that might eventually damage paper, or that could be transferred to other papers during handling. 

Manuscripts, maps, book pages, and other documents may benefit from surface cleaning. Brittle newspapers, photographs, or fine art prints might be harmed by inexpert attempts to surface-clean them. Works of art in any media that are not firmly bound to paper, such as pastel, pencil, or charcoal, might be lifted or smeared by cleaning, and they usually cannot withstand Do It Yourself Restoration Of Mold Damage On Paper surface cleaning at all. 

Examination of Do It Yourself Restoration Of Mold Damage On Paper paints and thicker inks under magnification may reveal minute flaking not obvious to the naked eye, and artifacts with hand-applied coloring may be particularly vulnerable to optical changes or transfer of the color. Cleaning of all such delicate objects should be left to a professional conservator. 

Dry removal of sticky deposits and surface accretions can be considered a kind of surface cleaning. Sticky tape adhesives damage paper and can create the physical Do It Yourself Restoration Of Mold Damage On Paper hazard of bonding papers to adjacent papers and enclosures. Some old tapes fall away as they age and leave thick, hardened adhesive residues. 

These residues, although unsightly, are not an immediate hazard, and they can be addressed only by a professional conservator. In fact, tape removal itself is difficult and should be referred to a professional Do It Yourself Restoration Of Mold Damage On Paper conservator. Sometimes, however, tape adhesive absorbs underlying text or image and the tapes cannot be removed at all. Insect excretions and rust deposits, such as those left by rusted paper clips, are not only disfiguring but also the source of ongoing damage to the paper. 

It is a good idea to remove these deposits when feasible. Closed books on the shelf normally present an effective Do It Yourself Restoration Of Mold Damage On Paper barrier to the entry of air-borne dirt into the text, but if the pages are cockled, the boards are lost, or a variety of other circumstances permit the entry of dirt, it will normally accumulate along the unbound edges of the pages. 

Coarser dirt may accumulate in the gutter (binding) edge of the pages. Both of these situations may call for surface cleaning. Moldy materials are obvious candidates for surface cleaning, which may be all that is possible or Do It Yourself Restoration Of Mold Damage On Paper necessary. Mold activity should first be stabilized by providing the affected materials with a prolonged environment of low relative humidity, generally below 50 percent, so that the mold goes dormant. 

Mold removal is a delicate procedure and requires careful work hygiene to avoid spreading contamination as much as possible. Mold can also affect the health of personnel, so protective Do It Yourself Restoration Of Mold Damage On Paper equipment such as respirators, gloves, and fume hoods should be used when removing it. Therefore this work is probably best left to a professional conservator, or in the case of large quantities of moldy office or archival papers or nonrare books, brought to a commercial enterprise that offers disaster-recovery services. 

SUPPLIES AND EQUIPMENT Several erasing compounds on the market are primarily intended for use by graphic designers and architects. They come in Do It Yourself Restoration Of Mold Damage On Paper containers of granules to be sprinkled on soiled drawings, or in cloth bags that leak small amounts of granules as they are rubbed across the surface of the paper. 

These granules are potentially damaging because they are abrasive and chemically unstable. In the past conservators recommended that practitioners simply clean the paper thoroughly of these granules after using them, but microscopic Do It Yourself Restoration Of Mold Damage On Paper examination of cleaned test papers has shown that considerable residue of the granules remains embedded in the fiber structure of the paper afterward. 

Conservators prefer to use granules produced by grinding up vinyl block erasers, available commercially from conservation suppliers. This cleaning agent is less abrasive and breaks down less during use, so it has less of a tendency to leave residues behind. The erasers used to make these Do It Yourself Restoration Of Mold Damage On Paper compounds are also sold as blocks, such as the noncolored Eberhard-Faber Magic Rub Eraser and the Staedtler Mars Plastic Eraser. 

The blocks are sometimes useful for surface cleaning. More commonly used by conservators nowadays, however, are vulcanized rubber dry-cleaning sponges, which were intended originally for soot removal following a fire. The sort recommended for Do It Yourself Restoration Of Mold Damage On Paper cleaning papers is not the "chemical sponge" because conservators avoid sponges that contain solvents or cleaning agents. 

The preferred sponges do not leave damaging residues on paper and they are not abrasive. They degrade upon exposure to light and with age, so they should be stored in an air-tight container in the dark. Creped rubber adhesive pickups are useful for lifting residues of pressure-sensitive tape and other Do It Yourself Restoration Of Mold Damage On Paper sticky deposits. 

Scalpels with a pointed Do It Yourself Restoration Of Mold Damage On Paper tip are good for picking off insect specks, rust deposits, and other small surface accretions. For all dry-cleaning procedures a clean, soft brush is needed. Brushes intended for surface cleaning should not be used for wet work, and any brushes used on moldy materials should be labeled and kept separately, to avoid spreading mold to other papers. 

HOW TO CLEAN Before attempting these Do It Yourself Restoration Of Mold Damage On Paper procedures it would be wise to practice them on expendable objects to test your confidence and comfort level. If unsure of any of these techniques, do not experiment with them on objects of value. To start work, clear a large, clean, smooth work surface. 

On it place a large sheet of inexpensive, clean Do It Yourself Restoration Of Mold Damage On Paper paper that can be changed frequently. Begin Do It Yourself Restoration Of Mold Damage On Paper cleaning by gently brushing the surface of an object with a soft brush to remove loose dirt and dust. (If this raises dust particles, wear a dust mask!) Under no circumstances should you brush over powdery media such as pastels or charcoal, or over flaking paint or ink. 

Be careful to avoid enlarging tears by brushing in the direction of the tear. Brush both sides of the sheet. Every few strokes brush across a clean Do It Yourself Restoration Of Mold Damage On Paper fabric or blotting paper to dislodge dirt from the brush. Gently rub sticky tape adhesives with numerous extremely short strokes of the creped rubber pickup eraser. 

This can be time-consuming, but numerous gentle strokes eventually pick up the adhesive without damaging the paper, as fewer, more forceful applications might. The adhesive is picked off the eraser with the Do It Yourself Restoration Of Mold Damage On Paper fingers.

Radon Maps

Biological Air Pollutants Provide adequate outdoor air ventilation. Keep equipment water reservoirs clean. Eliminate standing water, wash bedding and soft toys frequently in hot water. Vacuum carpets and upholstered furniture regularly. Read more at www.epa.gov/iaq/biologic.html Volatile O  read more..

Grants For Ice Storm Tree Removal

Determine Management Options and Goals
Any disaster debris management plan should include a disposal strategy. Communities need to set priorities for recycling wastes and determine the desired disposal options for the remaining waste. Segregate Hazardous Waste - Be prepared to [M  read more..

BASICS OF A LEAD PAINT HEALTH

BASICS OF A LEAD HEALTH & SAFETY PROGRAM All of the following protective measures are important for preventing work-related lead poisoning. Review each item and check the box if the statement is true for your Lead Paint Removal BASICS OF A LEAD PAINT HEALTH workplace. 

Unchecked boxes may indicat  read more..

Remove Smoke Odor From A Kitchen Fire

Electronic air cleaners, such as electrostatic precipitators (ESPs) and ionizers. ESPs use a small electrical charge to collect particles from air pulled through the device. Ionizers, or negative ion generators, Smoke Damage Remove Smoke Odor From A Kitchen Fire cause particles to stick to materials (such as carpet and walls) near the  read more..

How To Clean Smoke From Walls And Floors After Grease Fires

After the 1974 electronic system fire in Poitiers France, CNET developed what is considered the first modern test of corrosivity [70]. A number of other standards have since been developed that utilize a variety of fire and exposure models as well as several different methods of reporting results. T  read more..

How To Become An Emergency Planner

Many garage doors can be reinforced at their weakest points. Retrofitting your garage doors involves installing horizontal bracing onto each panel. This horizontal bracing can be Emergency Board up How To Become An Emergency Planner part of a kit from the garage door manufacturer. You may also need heavier hinges and stronger center supp  read more..

How To Clean Up Water In A Flooded Basement

Cleaning a basement after a flood Basements flooded with surface water, seepage through walls, or backflow from Basement Drying How To Clean Up Water In A Flooded Basement sewer lines often suffer little or no structural damage from the water, because the water inside braces the walls against the pressure of outside water and waterlogged soil. How   read more..

Natural Disaster Cleanup

Based solely upon the advice of the electronic restoration manager, suggestions listed below in this article might not be required for ‘small scale’ electronic restoration, as long as the source of water intrusion is repaired, cleanup is most likely achieved and the occupied locati  read more..

How To Dispose Of Asbestos Siding In Texas

This mandatory appendix specifies the procedure for analyzing air samples for asbestos and specifies quality control procedures that must be implemented by laboratories performing the analysis. The sampling and analytical methods described below represent the elements of the available monitoring├é&n  read more..

Salvage And Restoration Hints

Professional fire and water damage restoration businesses are a good source of cleaning and restoration of your personal belongings. Local companies offering this service can be located in the phone directory. The following information (from various sources) is offers for suggestion only and is not   read more..