Document restoration >> Do It Yourself Restoration Of Mold Damage On Paper

Although it is neither necessary nor desirable to remove all dirt or discoloration from old papers, surface cleaning sometimes improves the appearance of an artifact. Surface cleaning can also remove substances that might eventually damage paper, or that could be transferred to other papers during handling. 

Manuscripts, maps, book pages, and other documents may benefit from surface cleaning. Brittle newspapers, photographs, or fine art prints might be harmed by inexpert attempts to surface-clean them. Works of art in any media that are not firmly bound to paper, such as pastel, pencil, or charcoal, might be lifted or smeared by cleaning, and they usually cannot withstand Do It Yourself Restoration Of Mold Damage On Paper surface cleaning at all. 

Examination of Do It Yourself Restoration Of Mold Damage On Paper paints and thicker inks under magnification may reveal minute flaking not obvious to the naked eye, and artifacts with hand-applied coloring may be particularly vulnerable to optical changes or transfer of the color. Cleaning of all such delicate objects should be left to a professional conservator. 

Dry removal of sticky deposits and surface accretions can be considered a kind of surface cleaning. Sticky tape adhesives damage paper and can create the physical Do It Yourself Restoration Of Mold Damage On Paper hazard of bonding papers to adjacent papers and enclosures. Some old tapes fall away as they age and leave thick, hardened adhesive residues. 

These residues, although unsightly, are not an immediate hazard, and they can be addressed only by a professional conservator. In fact, tape removal itself is difficult and should be referred to a professional Do It Yourself Restoration Of Mold Damage On Paper conservator. Sometimes, however, tape adhesive absorbs underlying text or image and the tapes cannot be removed at all. Insect excretions and rust deposits, such as those left by rusted paper clips, are not only disfiguring but also the source of ongoing damage to the paper. 

It is a good idea to remove these deposits when feasible. Closed books on the shelf normally present an effective Do It Yourself Restoration Of Mold Damage On Paper barrier to the entry of air-borne dirt into the text, but if the pages are cockled, the boards are lost, or a variety of other circumstances permit the entry of dirt, it will normally accumulate along the unbound edges of the pages. 

Coarser dirt may accumulate in the gutter (binding) edge of the pages. Both of these situations may call for surface cleaning. Moldy materials are obvious candidates for surface cleaning, which may be all that is possible or Do It Yourself Restoration Of Mold Damage On Paper necessary. Mold activity should first be stabilized by providing the affected materials with a prolonged environment of low relative humidity, generally below 50 percent, so that the mold goes dormant. 

Mold removal is a delicate procedure and requires careful work hygiene to avoid spreading contamination as much as possible. Mold can also affect the health of personnel, so protective Do It Yourself Restoration Of Mold Damage On Paper equipment such as respirators, gloves, and fume hoods should be used when removing it. Therefore this work is probably best left to a professional conservator, or in the case of large quantities of moldy office or archival papers or nonrare books, brought to a commercial enterprise that offers disaster-recovery services. 

SUPPLIES AND EQUIPMENT Several erasing compounds on the market are primarily intended for use by graphic designers and architects. They come in Do It Yourself Restoration Of Mold Damage On Paper containers of granules to be sprinkled on soiled drawings, or in cloth bags that leak small amounts of granules as they are rubbed across the surface of the paper. 

These granules are potentially damaging because they are abrasive and chemically unstable. In the past conservators recommended that practitioners simply clean the paper thoroughly of these granules after using them, but microscopic Do It Yourself Restoration Of Mold Damage On Paper examination of cleaned test papers has shown that considerable residue of the granules remains embedded in the fiber structure of the paper afterward. 

Conservators prefer to use granules produced by grinding up vinyl block erasers, available commercially from conservation suppliers. This cleaning agent is less abrasive and breaks down less during use, so it has less of a tendency to leave residues behind. The erasers used to make these Do It Yourself Restoration Of Mold Damage On Paper compounds are also sold as blocks, such as the noncolored Eberhard-Faber Magic Rub Eraser and the Staedtler Mars Plastic Eraser. 

The blocks are sometimes useful for surface cleaning. More commonly used by conservators nowadays, however, are vulcanized rubber dry-cleaning sponges, which were intended originally for soot removal following a fire. The sort recommended for Do It Yourself Restoration Of Mold Damage On Paper cleaning papers is not the "chemical sponge" because conservators avoid sponges that contain solvents or cleaning agents. 

The preferred sponges do not leave damaging residues on paper and they are not abrasive. They degrade upon exposure to light and with age, so they should be stored in an air-tight container in the dark. Creped rubber adhesive pickups are useful for lifting residues of pressure-sensitive tape and other Do It Yourself Restoration Of Mold Damage On Paper sticky deposits. 

Scalpels with a pointed Do It Yourself Restoration Of Mold Damage On Paper tip are good for picking off insect specks, rust deposits, and other small surface accretions. For all dry-cleaning procedures a clean, soft brush is needed. Brushes intended for surface cleaning should not be used for wet work, and any brushes used on moldy materials should be labeled and kept separately, to avoid spreading mold to other papers. 

HOW TO CLEAN Before attempting these Do It Yourself Restoration Of Mold Damage On Paper procedures it would be wise to practice them on expendable objects to test your confidence and comfort level. If unsure of any of these techniques, do not experiment with them on objects of value. To start work, clear a large, clean, smooth work surface. 

On it place a large sheet of inexpensive, clean Do It Yourself Restoration Of Mold Damage On Paper paper that can be changed frequently. Begin Do It Yourself Restoration Of Mold Damage On Paper cleaning by gently brushing the surface of an object with a soft brush to remove loose dirt and dust. (If this raises dust particles, wear a dust mask!) Under no circumstances should you brush over powdery media such as pastels or charcoal, or over flaking paint or ink. 

Be careful to avoid enlarging tears by brushing in the direction of the tear. Brush both sides of the sheet. Every few strokes brush across a clean Do It Yourself Restoration Of Mold Damage On Paper fabric or blotting paper to dislodge dirt from the brush. Gently rub sticky tape adhesives with numerous extremely short strokes of the creped rubber pickup eraser. 

This can be time-consuming, but numerous gentle strokes eventually pick up the adhesive without damaging the paper, as fewer, more forceful applications might. The adhesive is picked off the eraser with the Do It Yourself Restoration Of Mold Damage On Paper fingers.

Public Water Systems Affected By Boulder Floods

General Draft Guidance for Public Water Systems Affected by September 2013 Flood Emergencies Water systems that have had a power outage or disruption in service Any water system that has lost power and/or had a disruption in water supply during the flood emergency should assume that there has b  read more..

Lead Paint Removal Requirements

Where any employee is exposed to lead above the permissible exposure limit for more than 30 days per year, the employer shall implement engineering, work practice, and administrative controls to reduce and maintain employee exposure to lead in accordance with the following implementation schedule ex  read more..

Remove Paint If You Dont Know If It Contains Lead

The standard also provides for a program of biological monitoring and medical surveillance for all employees exposed to levels of inorganic lead above the action level of 30 µg/m3 (TWA) for more than 30 days per year. The purpose of this document is to outline the medical surveillance provisions   read more..

Water Extraction

A lot of times we will have a situation where electronic devices get submerged or splashed with liquid, first step is to DISCONNECT ANY POWER SOURCE as quickly as you can. Make sure you do it in a safe way use caution when disconnecting any Electronic Restoration Water Extraction device household, household current is a higher  read more..

Hazmat Cleanup

People are always interested in, just what exactly police officers do when they arrive at a crime scene. The following is a step-by-step guideline that all law enforcement officers use. The officers who arrive at a Crime Scene Cleanup Hazmat Cleanup must be very cautious and methodical. T  read more..

How To Clean Up After Fire Damage

The correlation is even stronger than just by the day of test. Because each test had a 250 nm probe and a 4500 nm probe, the test-to-test correlation was strong as seen in Figure 11. The strength of the correlation seems to reinforce the variability in the performance of the material and not just un  read more..

Animal Control And Wildlife Management

The National Historic Preservation Act (NHPA) of 1966, and its implementing regulations (36 CFR 800), requires federal agencies to: 1) determine whether activities they propose constitute "undertakings" that can result in changes in the Animal Damage Animal Control And Wildlife Management character or use of historic properties. 

  read more..

Pest Control

SOONER OR LATER, we're all pestered by pests. Whether it's ants in the kitchen or weeds in the vegetable garden, pests can be annoying and bothersome. At the same time, many of us are concerned that the pesticides we use to control pests can cause problems too. How can pests be controlled safely? Wh  read more..

Why Do I Have A Sewage Smell In My House

Results of odor and odorants measurement at Districts A, B, C, D and E.In the instrumental analysis for individual sulfur odorants, H2S and CH3SH concentrations were higher than DMS or DMDS both before and after the agent treatment. The average NH3 concentrations before and after the treatment of th  read more..

Mitigate Radon Gas

The cost of reducing radon in your home depends on how your home was built and the extent of the radon problem. Most homes can be fixed for about the same cost as other common home repairs. The cost to fix can vary widely; consult with your state radon office or get one or Radon Mitigation Mitigate Radon Gas more estima  read more..