Document restoration >> Document Scanning And Restoration Software

Because books differ in value and in the way they are used, it is important to select an appropriate type of rebinding when they become damaged. Library binding, one type of rebinding, is probably chosen for more books than any other type. Library binding is a good choice where economy Document Scanning And Restoration Software and durability are the objectives. 

It is appropriate for books that are significant primarily for the Document Scanning And Restoration Software information they contain and that do not have value as objects. Books that have artifactual or associational significance in addition to informational value should be sent to a professional conservator for treatment. The goals of library binding have changed over the years. 

In the past, library binders strove to produce sturdy, economical, serviceable Document Scanning And Restoration Software bindings. 

As librarians and users began to take a fresh look at the physical quality of library materials, however, and became concerned with the open ability of a book and photocopying problems associated with over sewing, the goals of library binding broadened. In 1984 Jan Merrill-Oldham identified the Document Scanning And Restoration Software following desirable characteristics of a library binding: 

The binding should be as conservative as possible, altering the text block minimally; 2) the binding should be as non-damaging to the text block as possible and should not shorten its useful life; 3) the bound volume should open easily to a 180 position to facilitate non-damaging photocopying; and 4) the bound volume should stay open when resting face up on a flat surface so the Document Scanning And Restoration Software reader has both hands free and can take notes easily.

Today good open ability and minimal Document Scanning And Restoration Software intervention, as well as durability and low cost, are the primary goals of library binding. The result of this broadening of goals was the development of a revised edition of the Library Binding Institute Standard for Library Binding. 

This eighth edition of the Document Scanning And Restoration Software Standard includes changes in technical and materials specifications that reflect a heightened awareness of the importance of using archival-quality materials, and of legitimizing and perfecting a variety of binding methods. 

An updated version of this standard is in the process of being developed jointly by the National Information Standards Organization and the Library Binding Institute. It is not expected to differ significantly from the eighth edition of the Document Scanning And Restoration Software Standard. 

The eighth edition is based on the assumption that the reader is Document Scanning And Restoration Software knowledgeable of the materials, processes, machinery, and terminology used in library binding and is able to select the most appropriate option out of several that may be available. Its audience is mainly library binders. In response to the librarian's need for explanation, discussion, and historical context.

A Guide to the Library Binding Institute Standard for Library Document Scanning And Restoration Software Binding was prepared. This Guide is intended to enable readers to use the Standard to its fullest advantage. Both the Standard and the Guide should be followed when contracting for library binding. Contracts with library binders should specify methods and materials appropriate for the range of materials in a library's collections. 

They should be as detailed as necessary. Two sample Document Scanning And Restoration Software contracts are reproduced in the resource guide, Managing a Library Binding Program. Even though the Standard and Guide should be consulted no matter how limited the amount of binding being contracted, sometimes this is not possible. In very small institutions where the amount of binding being done is minimal, staff time is severely restricted, and staff members' knowledge of binding is limited. 

Such Document Scanning And Restoration Software institutions include small museums, historical societies, and historic sites. The following guidelines were drawn up with the needs of these institutions in mind. They are intended to assist library staff members in specifying binding so that basic standards of quality will be met and inadvertent damage avoided. 

It is important to remember that there are exceptions to every rule and that there will be books for which these Document Scanning And Restoration Software guidelines are not appropriate. 
These guidelines may in some cases cause the cost of rebinding to be higher than usual because of the extra time, handling, and special attention that they necessitate. 

This higher price, however, is usually not prohibitive for institutions doing a small amount of rebinding. When questioned informally, several library binders indicated that their firms would take Document Scanning And Restoration Software measures such as these if requested to do so. You may need to search for a binder who is interested in this type of work. 

In selecting a binder, choose one who is certified by the Library Binding Institute. That way you will be sure the binder is familiar with these procedures as well as with current trends and new techniques. The binder should not trim the edges of the book unless they are damaged or Document Scanning And Restoration Software pages are uncut. 

The Document Scanning And Restoration Software preservation of margins is important, and a no-trim policy insures that folded plates as well as images and text that bleed to the edges of pages will not be trimmed. Original signatures and sewing should be preserved in all fragile and special volumes. Ask that these volumes be "recased" whenever possible. 

Where original sewing is badly deteriorated in an important book, ask to have the Document Scanning And Restoration Software book resewn through the folds using the original sewing stations if possible. This is an expensive option. Another is to have a box made for the book instead. Books that cannot be recased or resewn through the folds should almost always be double-fan adhesive bound rather than over sewn. 

The binder may be given the authority to decide when over sewing is necessary (usually because of extreme Document Scanning And Restoration Software thickness or heaviness of a text block). The technique, however, should be used only very rarely. If it is used more often than that, seek advice from a consultant who can evaluate the binder's decisions. 

For paper repairs, a paper-based pressure-sensitive tape with acrylic adhesive should be used rather than a household-type plastic-based tape. Although use of Japanese paper and starch paste repairs is a Document Scanning And Restoration Software standard conservation procedure, the need for such repairs, which require a high degree of skill, signals the need for conservation binding rather than library binding. 

Ask the binder what materials will be used in repair work and, if you are unsure of the quality, ask a conservator if these materials are appropriate. Remember that repair tape is not suitable for books that have artifactual or associational significance, but only for books valuable solely for the Document Scanning And Restoration Software information they contain.

Wood Peckers Starlings Sparrows And Chimney Swi

The NHPA requires: 1) federal agencies to evaluate the effects of any federal undertaking on cultural resources, 2) consult with the State Historic Preservation Office regarding the value and management of specific cultural, archaeological and historic resources, and 3) consult with appropriate Amer  read more..

How To Get Smoke Damage Out

Wet books must be taken care of as soon as possible. The best method to save wet books is to freeze them in a vacuum freezer. This special freezer will remove the moisture without damaging the pages. If there is a delay in locating such a freezer, Smoke Damage How To Get Smoke Damage Out place them in a normal freezer until   read more..

How To Paint Over Fire Damaged Wood

New York City's firefighters, fire officers and Fire Damage How To Paint Over Fire Damaged Wood hundreds of other public safety advocates are calling on the New York City Council to adopt a model building code developed by the National Fire Protection Association (NFPA).

During a hearing yesterday before the City Council's Co  read more..

Tree Removal

Once the envelope of the structure has been penetrated during loss of windows or doors, or because of roof damage, wind force on interior surfaces and structures becomes an issue. Openings may cause pressurization or depressurization of a Wind Damage Tree Removal structure. Pressurization drives wall boards and sheathi  read more..

Flood Damage

So your tenants moved out without notice about Tenant Move Out Cleanup Flood Damage. So your tenants of moved out and upon inspecting the premises after they moved, you find water all over the floors. First step is, call a professional water restoration company. Let them deal with your insurance company as they know how to   read more..

Mold Resistant Drywall

Flood waters and water damage from this emergency will pose special problems for the thousands of people with existing lung disease and may increase the likelihood of the development of lung disease. Water damage from rains associated with Mold Remediation Mold Resistant Drywall a hurricane can pose risks to the public well  read more..

How To Get Rid Of Sewage

Overhead Sewers. The basement floor drain and any plumbing fixtures in the lower levels of your house that have experienced backups will be disconnected from the sewer system. Plumbing from those fixtures will be re-routed to a sealed tank. Inside the tank,an ejector pump lifts the waste water up se  read more..

Lead based Paint Can Cause Lead Poisoning

The employer shall make available upon request all records required to be maintained by this subsection to the Chief and the Director for examination and copying. (B) Environmental monitoring, medical removal, and medical records required by this section shall be provided upon request to employees,   read more..

EPA Clean Up Lead Contaminated Soil

For an employee removed due to a final medical determination, when a subsequent final medical determination results in a medical finding, determination, or opinion that the employee no longer has a detected medical condition which places the employee at increased risk of material impairment to healt  read more..

Work Related Lead Testing

For industrial workers, What can I do to protect myself? Make sure you don't accidentally swallow lead. Wash your hands and face with soap and water before eating or drinking and before leaving work. Do not eat, drink, or smoke in the work area. Take a shower Lead Paint Removal Work Related Lead Testing and wash your hair as soo  read more..