Document restoration >> Document Scanning And Restoration Software

Because books differ in value and in the way they are used, it is important to select an appropriate type of rebinding when they become damaged. Library binding, one type of rebinding, is probably chosen for more books than any other type. Library binding is a good choice where economy Document Scanning And Restoration Software and durability are the objectives. 

It is appropriate for books that are significant primarily for the Document Scanning And Restoration Software information they contain and that do not have value as objects. Books that have artifactual or associational significance in addition to informational value should be sent to a professional conservator for treatment. The goals of library binding have changed over the years. 

In the past, library binders strove to produce sturdy, economical, serviceable Document Scanning And Restoration Software bindings. 

As librarians and users began to take a fresh look at the physical quality of library materials, however, and became concerned with the open ability of a book and photocopying problems associated with over sewing, the goals of library binding broadened. In 1984 Jan Merrill-Oldham identified the Document Scanning And Restoration Software following desirable characteristics of a library binding: 

The binding should be as conservative as possible, altering the text block minimally; 2) the binding should be as non-damaging to the text block as possible and should not shorten its useful life; 3) the bound volume should open easily to a 180 position to facilitate non-damaging photocopying; and 4) the bound volume should stay open when resting face up on a flat surface so the Document Scanning And Restoration Software reader has both hands free and can take notes easily.

Today good open ability and minimal Document Scanning And Restoration Software intervention, as well as durability and low cost, are the primary goals of library binding. The result of this broadening of goals was the development of a revised edition of the Library Binding Institute Standard for Library Binding. 

This eighth edition of the Document Scanning And Restoration Software Standard includes changes in technical and materials specifications that reflect a heightened awareness of the importance of using archival-quality materials, and of legitimizing and perfecting a variety of binding methods. 

An updated version of this standard is in the process of being developed jointly by the National Information Standards Organization and the Library Binding Institute. It is not expected to differ significantly from the eighth edition of the Document Scanning And Restoration Software Standard. 

The eighth edition is based on the assumption that the reader is Document Scanning And Restoration Software knowledgeable of the materials, processes, machinery, and terminology used in library binding and is able to select the most appropriate option out of several that may be available. Its audience is mainly library binders. In response to the librarian's need for explanation, discussion, and historical context.

A Guide to the Library Binding Institute Standard for Library Document Scanning And Restoration Software Binding was prepared. This Guide is intended to enable readers to use the Standard to its fullest advantage. Both the Standard and the Guide should be followed when contracting for library binding. Contracts with library binders should specify methods and materials appropriate for the range of materials in a library's collections. 

They should be as detailed as necessary. Two sample Document Scanning And Restoration Software contracts are reproduced in the resource guide, Managing a Library Binding Program. Even though the Standard and Guide should be consulted no matter how limited the amount of binding being contracted, sometimes this is not possible. In very small institutions where the amount of binding being done is minimal, staff time is severely restricted, and staff members' knowledge of binding is limited. 

Such Document Scanning And Restoration Software institutions include small museums, historical societies, and historic sites. The following guidelines were drawn up with the needs of these institutions in mind. They are intended to assist library staff members in specifying binding so that basic standards of quality will be met and inadvertent damage avoided. 

It is important to remember that there are exceptions to every rule and that there will be books for which these Document Scanning And Restoration Software guidelines are not appropriate. 
These guidelines may in some cases cause the cost of rebinding to be higher than usual because of the extra time, handling, and special attention that they necessitate. 

This higher price, however, is usually not prohibitive for institutions doing a small amount of rebinding. When questioned informally, several library binders indicated that their firms would take Document Scanning And Restoration Software measures such as these if requested to do so. You may need to search for a binder who is interested in this type of work. 

In selecting a binder, choose one who is certified by the Library Binding Institute. That way you will be sure the binder is familiar with these procedures as well as with current trends and new techniques. The binder should not trim the edges of the book unless they are damaged or Document Scanning And Restoration Software pages are uncut. 

The Document Scanning And Restoration Software preservation of margins is important, and a no-trim policy insures that folded plates as well as images and text that bleed to the edges of pages will not be trimmed. Original signatures and sewing should be preserved in all fragile and special volumes. Ask that these volumes be "recased" whenever possible. 

Where original sewing is badly deteriorated in an important book, ask to have the Document Scanning And Restoration Software book resewn through the folds using the original sewing stations if possible. This is an expensive option. Another is to have a box made for the book instead. Books that cannot be recased or resewn through the folds should almost always be double-fan adhesive bound rather than over sewn. 

The binder may be given the authority to decide when over sewing is necessary (usually because of extreme Document Scanning And Restoration Software thickness or heaviness of a text block). The technique, however, should be used only very rarely. If it is used more often than that, seek advice from a consultant who can evaluate the binder's decisions. 

For paper repairs, a paper-based pressure-sensitive tape with acrylic adhesive should be used rather than a household-type plastic-based tape. Although use of Japanese paper and starch paste repairs is a Document Scanning And Restoration Software standard conservation procedure, the need for such repairs, which require a high degree of skill, signals the need for conservation binding rather than library binding. 

Ask the binder what materials will be used in repair work and, if you are unsure of the quality, ask a conservator if these materials are appropriate. Remember that repair tape is not suitable for books that have artifactual or associational significance, but only for books valuable solely for the Document Scanning And Restoration Software information they contain.

Storm Damage

Immediate reaction to a Water Damage Storm Damage emergency redeems time and money, and guards traits and health. The main goals of controlling water damage are well known to professional water damage restorers and public health professionals. These goals are to guard public hea  read more..

How To Restore Smoke Damaged Archive Photos

If the repository chooses not to use one of the tools cited above, these following questions will help to establish the enduring research or Document restoration How To Restore Smoke Damaged Archive Photos educational value of a collection or a publication in terms of institutional priorities and the overall documentation available on the topic covered:   read more..

How To Board Up Windows In A Vacant House

All licensed contractors who desire to participate in the Emergency Board-Up eligibility list shall prepare and file an application with the Fire Marshal at any time during the month of May to be reviewed for inclusion in the following fiscal year (July through June). The application shall include,   read more..

How To Clean After A Demolition

This plan has been developed to provide the framework for County government and other entities to clear and remove debris generated by a natural or human made event. This Debris Management Plan focuses on the types of activities that are likely to be required during a disruption or emergency, withou  read more..

Mold Inspection

Health Concerns If building occupants are reporting serious health concerns, you should consult a health professional. In cases in which a particularly toxic mold species has been identified or is suspected, when extensive hidden mold is expected (such as behind vinyl wallpaper or in the HVAC s  read more..

How To Remove Mold On Drywall

I heard about "toxic molds" that grow in homes and other buildings. Should I be concerned about a serious health risk to me and my family?The term "toxic mold" is not accurate. While certain molds are toxigenic, meaning they can produce toxins (specifically mycotoxins), Mold Remediation How To Remove Mold On Drywall the molds them  read more..

Lead Was Used For Many Years In Plumbing

Testing your home's drinking water is the only way to confirm if lead is present. Most water systems test for lead at a certain number of homes as a regular part of water monitoring. These tests give a system-wide picture of whether or not corrosion is being controlled but do not reflect conditions   read more..

Flood Damage

Did you know the average residential house loses 14% of the water delivered to leaks? In an average home, 22 gallons of water are lost to leakage every day, and the usual suspects are leaking toilets or dripping faucets. This daily water leakage amount is ab  read more..

Removing Lead Pipes

Lead can enter drinking water through corrosion of plumbing materials, especially where the water has high acidity or low mineral content that corrodes pipes and fixtures. Homes built before 1986 are more likely to have lead pipes, fixtures and solder. However, new homes are also at risk: Lead Paint Removal Removing Lead Pipes even   read more..

What To Do Immediately After The Fire

What To Do Immediately After the Fire Try to remain calm. Listen carefully to what people are telling you. Tell a Reno Fire Department or REMSA member if you have immediate medical needs. If you cannot live in your home and the structure is safe to enter, a fire department representative will accomp  read more..