Water Damage >> Water Damage From Leaking Water Heater

Water heater leaks are usually quite obvious and you will discover substantial amounts of water on the floor around your heater. Normally, the first sign of a heater problem is water dripping from the bottom of the jacket. This indicates that the tank has corroded through. The cure may be installation of a new heater, or Water Damage From Leaking Water Heater you may be able to repair the leak. 

Water Heater Leaking from the Bottom? Before turning off water to water heater try to locate the source of the leak (it may not be the water heater leaking). To attempt to locate the source of the leak first check the top of the water heater. If the top of the water heater is wet, Water Damage From Leaking Water Heater check the water lines leading from the wall to the top of the water heater. 

There will be two water lines. The line on the left is the hot water line. The line on the right is the cold water line. If water is leaking from hot or cold water lines your water heater should be okay. If the water heater is dry on the top, Water Damage From Leaking Water Heater check the hose bib (place where hose can be hooked up) at the bottom side of water heater. 

If the hose bib is dry Water Damage From Leaking Water Heater the water heater needs replaced. Before turning water off to a gas water heater. TURN OFF THE GAS. To turn off the gas. On left of water heater (usually on left) is a flexible gas supply. Follow the gas supply back to gas shut off. Turn the lever on the gas shut off 1/4 turn. The gas is now off. 

Before turning off the water to an electric water heater you must turn off the circuit breaker to water heater. To turn off the water to the water heater, Water Damage From Leaking Water Heater locate the cold water line at the top right of the water heater. Follow the cold water line from the water heater toward the wall. There should be a gate valve on that line. 

Turn the handle on the gate valve clockwise until it stops. If the gate valve is stuck open or there isn't one, Water Damage From Leaking Water Heater the entire water system to the house will need to be shut off. To shut off the entire water system check for the gate valve at front of house. The gate valve has a round handle. Turn the handle clockwise until it stops. 

If gate valve is stuck or there isn't one you will need to shut off the water at the water meter. The next step is to drain the water heater. You will need a garden hose Water Damage From Leaking Water Heater and adjustable pliers. At the bottom front of the water heater there is a hose bib (a place to hook up garden hose). Stretch the garden hose out making sure there are no kinks in it. 

Screw the garden hose on to the hose bib. The garden hose must be lower than the hose bib to function properly. To open the hose bib. Turn the handle (if there is one) counter clockwise until it stops. This will be a few turns. If your hose bib does not have a handle Water Damage From Leaking Water Heater and is a round plastic fixture. Grab the fixture and turn it counter-clockwise a few turns. 

There will not be much water draining through the garden hose if any. You will need to displace the water with air. To do this, find the closest fixture (kitchen sink faucet, bathroom sink faucet, Water Damage From Leaking Water Heater or tub/shower faucet). Open the hot side only. This will allow air into the water heater and cause it to drain. 

If the water heater does not start draining, close the faucet at whatever sink you turned on. Turn the water back on to the water heater (the valve above the water heater). Be sure to turn it all the way on, Water Damage From Leaking Water Heater you need the pressure. Now water should be draining from the garden hose rapidly. What you are doing is clearing the hose bib of sediment so it will drain. 

Continue to drain in this fashion for a few minutes. Shut the water off at the water heater and open whichever hot water you opened earlier. The water heater should be draining .It may be slow, just let it drain. Water Heater Will Not Drain? You must wear goggles, Water Damage From Leaking Water Heater thick gloves, and protective clothing while doing this repair! 

Tools you will need: 1- 14" pipe wrench 1 pair 12" adjustable pliers 1- 10" screw driver(optional) 1- 3/4 x 5" galvanized nipple 1-3/4" fip x male hose adpt. 1-low top bucket Screw the hose adapter onto the galvanized nipple and Water Damage From Leaking Water Heater have the bucket ready to catch any water that starts running out of the water heater. 

If after following the instructions outlined above and the water heater does not drain, Water Damage From Leaking Water Heater close the hot water faucet you opened earlier. Remove the garden hose from the hose bib. Carefully remove the hose bib from the water heater. There are several different types of hose bibs on water heaters. If your water heater has a round plastic hose bib. 

Turn the hose bib counter clockwise until it comes off. You may have to pull on the hose bib to get to get it out. Be careful. There is going to be hot water in the water heater. Water will be slowly running out of the water heater into the bucket. After removing the round plastic hose bib, Water Damage From Leaking Water Heater there will be a pipe nipple still in the water heater. Using your pipe wrench. 

Remove the nipple by turning it counter-clockwise. As soon as you remove the pipe nipple from the water heater, Water Damage From Leaking Water Heater replace it with the nipple you have put the hose adapter on. Attach the hose to the adapter and open the hot side of the closest faucet and let it drain. 

If your water heater has a hose bib that has a knob on top. Just remove the hose bib with your pipe wrench Water Damage From Leaking Water Heater and replace with the galvanized nipple with adapter. Follow instructions outlined above.

Remove Fire Smoke Smell From Clothes

This section addresses the use of masks and respirators by the public and workers to reduce inhalation of wildfire smoke, specifically harmful particles. Use of the term "mask" in this context may cause confusion for both public health officials and the general public, as it can refer to one-strap p  read more..

How To Fix A Wet Crawl Space From Mold

Set your home's thermostat at the coolest level you can without making your rooms uncomfortable. For most homes, the heating bill drops by about 2 percent for every 1 degree the thermostat is lowered. Crawl Space Drying How To Fix A Wet Crawl Space From Mold Lower your home's thermostat at bedtime or while you're away during the day.     read more..

Debris Cleanup From Tornados

Direct costs can be defined as the cost of debris removal, property damage, and response for a specific tornado event. All other costs are indirect and include loss of industrial and commercial productivity as a result of damage to infrastructure, facilities, or interruption of services. As a result  read more..

Asbestos Abatement Training

The asbestos awareness training that is provided by OSHA is for workers in a number of different industries, including the construction industry to gain knowledge about the risks of Asbestos Abatement Asbestos Abatement Training. The employees working in the manufacturing industry are also at risk for a significant amount of exposure  read more..

Raw Sewage Is A Major Health Hazard

The City of Decatur has a sewer user fee that was established in April 1998. The sewer user fee was set at a rate of $0.34 per one hundred cubic feet of water used for residential, commercial, and light industrial users. The City also has a rate of $0.45 per one hundred cubic feet for water that is   read more..

Getting Rid Of Lead Paint

Some methods generate so much lead contaminated dust that their use is prohibited. They are: Open-flame burning or torching Sanding, grinding, planing, needle gunning, or blasting with power tools and equipment not equipped with a shroud and HEPA vacuum attachment and Lead Paint Removal Getting Rid Of Lead Paint Using a heat gun  read more..

Difficult Smoke Cleanup

Because of the scale of the project the usual solvent toxicity and flammability protection techniques were impractical or impossible. For this reason the solvent of choice was Freon 113 (Dupont), a solvent that is both non-flammable and relatively non-toxic. 4.1 PROCEDURE FOR APPLYING POULTICE Appro  read more..

The Dangers Of Raw Sewage

Establish temperature control to enhance the evaporation rate and effectiveness of ventilation or dehumidification systems in use. All solid waste must be collected and discarded. Use dehumidifiers, fans, window air conditioners and open windows to aid in the drying process when available. Exchange   read more..

The Advantages Of Covering Asbestos Vs Removal

The secretary, upon a finding that a business entity has violated any provision of this act or any rules and regulations adopted under this act, may impose a civil penalty within the limits provided in this section upon such business entity, which civil penalty shall be in an a  read more..

Mold Remediation

After there is a fire and the Fire Damage Mold Remediation building has become saturated with water, then the presence of mold has become a major area of concern related to health in our indoor environment. Molds can be an important part of the natural environment and they have been around since the beginning of tim  read more..