Water Damage >> Water Heater Leaking From The Bottom

After floods, excess moisture and standing water contribute to the growth of mold in homes and other buildings. When returning to a home that has been flooded, be aware that mold may be present and may be a health risk for your family. People at Greatest Risk from Mold People with asthma, allergies or Water Heater Leaking From The Bottom other breathing conditions may be more sensitive to mold. 

People with immune suppression (such as people with HIV infection, cancer patients taking chemotherapy and people who have received an organ transplant) are more susceptible to mold infections. Possible Health Effects of Mold Exposure People who are sensitive to mold may experience stuffy nose, irritated eyes, Water Heater Leaking From The Bottom wheezing, or skin irritation. 

People allergic to mold may have difficulty in breathing and shortness of breath. People with weakened immune systems and with chronic lung diseases, such as obstructive lung disease, Water Heater Leaking From The Bottom may develop mold infections in their lungs. If you or your family members have health problems after exposure to mold, contact your doctor or other health care provider. 

Recognizing Mold You may recognize mold by: Sight(Are the walls and ceiling discolored, or do they show signs of mold growth or water damage?) Smell (Do you smell a bad odor, Water Heater Leaking From The Bottom such as a musty, earthy smell or a foul stench?) Safely Preventing Mold Growth Clean up and dry out the building quickly (within 24 to 48 hours). Open doors and windows. 

Use fans to dry out the building. When in doubt, take it out! Remove all porous items that have been wet for more than 48 hours and that cannot be thoroughly cleaned and Water Heater Leaking From The Bottom dried. These items can remain a source of mold growth and should be removed from the home. 

Porous, noncleanable items include carpeting and carpet padding, upholstery, wallpaper, drywall, floor and ceiling tiles, insulation material, some clothing, leather, paper, Water Heater Leaking From The Bottom wood and food. Removal and cleaning are important because even dead mold may cause allergic reactions in some people. 

To prevent mold growth, clean wet items and surfaces with detergent and Water Heater Leaking From The Bottom water. Homeowners may want to temporarily store items outside of the home until insurance claims can be filed. If you wish to disinfect, refer to the U.S. Environmental Protection Agency (EPA) document, A Brief Guide to Mold and Moisture in Your Home. 

If there is mold growth in your home, you should clean up the mold and fix any water problem, such as leaks in roofs, Water Heater Leaking From The Bottom walls or plumbing. Controlling moisture in your home is the most critical factor for preventing mold growth. To remove mold growth from hard surfaces use commercial products, soap and water, or a bleach solution of no more than 1 cup of bleach in 1 gallon of water. 

Use a stiff brush on rough surface materials such as concrete. If you choose to use bleach to remove mold: Never mix bleach with ammonia or other household cleaners. Mixing bleach with ammonia or other cleaning products will produce dangerous, Water Heater Leaking From The Bottom toxic fumes Open windows and doors to provide fresh air. Wear non-porous gloves and protective eye wear. 

If the area to be cleaned is more than 10 square feet, consult the U.S. Environmental Protection Agency (EPA) guide titled Mold Remediation in Schools and Commercial Buildings . Although focused on schools and commercial buildings, Water Heater Leaking From The Bottom this document also applies to other building types. 

You can get it free by calling the EPA Indoor Air Quality Information Clearinghouse at (800) 438-4318, or by going to the EPA web site at http://www.epa.gov/mold/mold_remediation.html . Always follow the manufacturer's instructions when using bleach or Water Heater Leaking From The Bottom any other cleaning product. More information on personal safety while cleaning up after a natural disaster is available at emergency.cdc.gov/disasters/workers.asp. 

If you plan to be inside the building for a while or you plan to clean up mold, you should buy an N95 mask at your local home supply store Water Heater Leaking From The Bottom and wear it while in the building. Make certain that you follow instructions on the package for fitting the mask tightly to your face. If you go back into the building for a short time and are not cleaning up mold, you do not need to wear an N95 mask. 

Mold or mildew are fuzzy growths. Mold usually has a musty or earthy odor and can be different colors like black, blue, green, red, orange and white. Molds reproduce by releasing tiny spores, Water Heater Leaking From The Bottom too small to see with the naked eye, that float thru the air. Mold spores need nutrients, average room temperatures and moisture to grow. 

Where is mold found indoors? Mold spores are in the air and on all surfaces. Mold spores are very tiny and light-weight so they float in the air for a long time. Common places to find mold growth are in the bathrooms, kitchens, basements, and Water Heater Leaking From The Bottom the heating, ventilation and air conditioning (HVAC) unit. Watch for signs of moisture such as condensation, standing water/wet surfaces, and water-damaged materials. 

How can mold growth be controlled indoors? Mold is reduced when the home or Water Heater Leaking From The Bottom building is clean and dry Keep humidity levels between 40 – 60%. Running an air conditioner helps keep humidity levels low. Avoid using humidifiers or vaporizers. Install a humidity monitor to gauge humidity levels. Use a dehumidifier as needed. 

Many detect the humidity level, and turn on and off to adjust. Empty and wipe out the reservoir daily. Wipe hard surfaces with a damp, Water Heater Leaking From The Bottom soapy cloth weekly. Inspect the roof for damage. Repair any damage right away. Be sure the ventilation system is clean and working properly. Fix plumbing leaks and clean or replace water-damaged materials. 

Be sure carpets are dry, clean, and free of food waste. Do not install carpeting in rooms or areas where there is a constant moisture problem. Replace absorbent materials, like carpet and Water Heater Leaking From The Bottom ceiling tiles, that have been wet for more than 24 to 48 hours. Vent clothing dryers, showers, and exhaust fans outdoors. 

Use exhaust fans while cooking, running dishwashers, and showering. Clean out the refrigerator often. Throw away old food. Wipe shelves, walls, inside and under drawers with a damp, Water Heater Leaking From The Bottom soapy cloth. Check drip pans under the refrigerator for standing water. Drain water and wipe with a damp, soapy cloth. Limit the number of houseplants. Mold grows in the soil. Repot plants yearly.

Methamphetamine Manufacturing

Methamphetamine Manufacturing and Common Manufacturing ChemicalsIn Kentucky, the majority of known meth Meth Lab Cleanup Methamphetamine Manufacturing labs have used the Anhydrous Ammonia also known as theBirch or Nazi method (See Figure A, Methamphetamine Manufacturing Processes). These labs areable to produce small quantities of meth  read more..

Tunneling animals

You want to have the nicest lawn in the neighborhood, you want people to think that Arnold Palmer lives here. The last thing you want is some kind of animal damage, some animal rooting around in your garden or tearing up your grass. You think,” how can I stop this”, but first you s  read more..

Lead House Paint Removal

Lead was used in house paint to add color, enhance the durability of the house paint to hide the surface it covers, and to make it last a lot longer. In 1978 the government barred lead house paint for use in houses. Houses that were built before 1978 most lik  read more..

Radon Mitigation

Turns out that your tenant works at the local nuclear power plant, one day when they are at work they decide to test themselves for radiation. The radiation levels go off the charts, and they determine that the radiation is coming from your rental house, so they want a Tenant Move Out Cleanup Radon Mitigation.  Radon is a color  read more..

How To Remove Asbestos Paint From A Ceiling

Treat at least two different areas of each phase in this fashion. Choose representative areas of the sample. It may be useful to select particular areas or fibers for analysis. This is useful to identify asbestos in severely in homogeneous Asbestos Abatement How To Remove Asbestos Paint From A Ceiling samples. 

  read more..

Meth Manufacturing Labs

Once decontamination is completed, the certified contractor must perform the post-decontaminationsampling to determine compliance with the decontamination standard. It is also the responsibility of thecertified contractor to arrange for disposal of all waste materials, Meth Lab Cleanup Meth Manufacturing Labs inspect the dumpster  read more..

How To Paint Concrete In Basements For A Moisture

The optimal method to enhance the hygrothermal performance of basement walls is to apply exterior waterproofing and insulation extending the full depth of the foundation wall, and ensure proper drainage Basement Drying How To Paint Concrete In Basements For A Moisture at the bottom (footing) of the foundation. Such an approach can be very costly and disr  read more..

Small Contractors And Lead Paint

Small contractors are an especially difficult audience to reach with a safety message, and yet there are thousands of them across the United States who, on a daily basis, direct thousands of employees in their work. Most construction companies are small, and the way in which health and safety practi  read more..

Information About Lead Paint Safety

We asked about making changes after attending the seminar, including testing paint for lead; using containment; using safer, less dusty, work methods; cleaning up with HEPA vacuums or wet methods; providing half-mask P-100 (HEPA) respirators; and providing blood lead testing. In nearly all these are  read more..

Asbestos Abatement Services

The project dates must be consistent with the contract documents, but must also reflect the actual dates that the contractor anticipates being on site. For example, if the contract requires that the work be conducted in June but the work will require only one week for completion, the notification mu  read more..