Radon Mitigation >> Radon Transform

RADON TRANSFORM MITIGATION STANDARDS 1.0 BACKGROUND The 1988 Indoor Radon transform Abatement Act (IRAA) required the Environmental Protection Agency (EPA) to develop a voluntary program to evaluate and provide information on contractors who offer radon transform Radon Transform control services to homeowners. 

The Radon transform Contractor Proficiency (RCP) Program was established to fulfill this portion of the IRAA. In December 1991, EPA published "Interim Radon transform Mitigation Standards" as initial guidelines for evaluating the Radon Transform performance of radon transform mitigation contractors under the RCP Program. 

Over the past six years, Radon Transform the effectiveness of the basic radon transform mitigation techniques set forth in the, "Interim Standards" has been validated in field applications throughout the United States. This experience now serves as the basis for the more detailed and final Radon transform Mitigation Standards (RMS) set forth in this document. 

PURPOSE The purpose of the RMS is to provide radon transform mitigation contractors with uniform standards that will ensure quality and effectiveness in the design, installation, and evaluation of radon transform mitigation systems in detached and Radon Transform attached residential buildings three stories or less in height. The RMS is intended to serve as a model set of requirements which can be adopted or modified by state and local jurisdictions to fulfill objectives of their specific radon transform contractor certification or licensure programs. 

PARTICIPANTS Minimum requirements are established in the RMS for individuals nationwide who perform radon transform remediation work and wish to participate in the RCP Program. To participate in EPA's RCP Program, Radon Transform the mitigation contractor shall have completed all RCP training and examination requirements, be listed in the current RCP Listing Report, and shall agree to follow the provisions of the RMS. 

SCOPE The Radon Transform requirements addressed in the RMS include the following categories of contractor activity: General Practices, Building Investigation, Worker Health and Safety, Systems Design, Systems Installation, Materials, Monitors and Labeling, Post-Mitigation Testing, and Contracts and Documentation. 

ASSUMPTION Before applying the provisions of the RMS, Radon Transform it is assumed that appropriate radon transform/radon transform decay product measurements have been performed within the structure, and that the owner has decided that radon transform remediation is necessary. 

IMPLEMENTATION 6.1 The RMS includes requirements for installation of radon transform remediation systems and provides a basis for evaluating the quality of those installations. It may be adopted by state regulatory agencies for state or local radon transform mitigation contractor licensure Radon Transform programs. It may also be used as a reference during inspection of in-progress or completed radon transform mitigation work. 

Contractors shall personally conduct follow-up inspection of any radon transform mitigation systems installed by their firm or Radon Transform by subcontractors to insure conformance with the requirements of the RMS. This requirement shall include the post-mitigation testing prescribed in paragraph 17.0. 6.3 EPA will evaluate reports of non- compliance with the RMS that are referred to the Agency by states and other agencies that monitor radon transform mitigation services. 

Based on its evaluation, EPA may initiate established RCP program delisting procedures against contractors that the Agency or States (with certification programs) find are in violation of the mandatory provisions of the RMS (See paragraph 6.4). In addition, Radon Transform EPA or its agent may conduct inspections of radon transform mitigation projects. 

State radon transform program personnel or Radon Transform their contracted representatives are considered EPA agents for conducting such inspections. Those provisions of the RMS that are considered to be mandatory are prefaced by the term "shall." Provisions that are considered good practice but which are not mandatory are prefaced by the terms "should" or "recommended." 

The RMS will be updated as necessary, and in response to technological advances and field experience. LIMITATIONS Although the provisions of the RMS have been carefully reviewed for potential conflicts with other regulatory requirements, Radon Transform adherence to the RMS does not guarantee compliance with the applicable codes or regulations of any other Federal, state, or local agency having jurisdiction. 

Where discrepancies exist between provisions of the RMS and local codes or regulations, local codes shall take precedence. However, Radon Transform where compliance with local codes necessitates a deviation from the RMS, EPA recommends that RCP listed contractors report the deviation in writing to the appropriate EPA Regional Office and the appropriate state regulatory official within 30 days. 

It should be noted that EPA is not requiring the reporting Radon Transform that is recommended in this paragraph. States with radon transform contractor certification programs may require that contractors give prior notification of their intent to deviate from the RMS for research or other purposes.

Carpet Stains From Storm Damage

Because both characteristics vary broadly in lumber cut from different species and trees of the same species, they account for much of the normal variations encountered in the character of wood and its response to cure or use. 'As an archetype, the time needed to dry wood under a given set of condit  read more..

Water Damage

When dealing with larger Document restoration Water Damage projects additional control measures should be applied for sensitive areas such as patient care, office settings or vivarium areas.  The application of these measures should be made on a case-by-case basis, such as enclose and close off critical areas with p  read more..

Ceiling Leak Repair From Frozen Pipe

The first drying phase can be modeled by the normal diffusion equation (Equation 2) for which analytic solutions can be found in the literature (e.g., Baehr and Stephan 2003; Hens 2007; and Tautz 1971). The second drying phase is Structural Drying Ceiling Leak Repair From Frozen Pipe assumed to start at critical moisture content.  <  read more..

Floods Are The 1 Natural Disaster In The United S

Flood Facts WARNING: How Flood Smart are YOU? Floods are the #1 natural disaster in the United States. Why Care About Flooding Floods are the most common natural disaster in the United States. From 2003 to 2012, total flood insurance claims averaged more than $3.0 billion per year. In high-risk area  read more..

Regulations For Meth Cleanup

Evaluation of other Potential ReleasesKDWM shall be contacted immediately if evidence of a release of a hazardous substance related to methlab activity is observed to the environment outside the Meth Lab Cleanup Regulations For Meth Cleanup inhabitable property, i.e., soil staining, spills,chemical containers with wastes or residues,   read more..

Tropical Hurricane Hugo Storm Damage

Hurricane Hugo in 1989 was the most powerful Wind Damage Tropical Hurricane Hugo Storm Damage and rainstorm to hit the United States since 1969 when Camille hit the Gulf Coast. Hugo was disastrous and caused extensive residential wind damage, widespread lifeline annihilation, and massive timber devastation in South Carolina. The rainst  read more..

Fire Damage

Artistic Emergency Board up Fire Damage means painting on material that is used to secure door, window, or other openings to resemble the original opening which they are covering. There is to be no standard pattern requirement. The overall purpose is to have a structure that does not draw attention to the eye of someo  read more..

How To Become A Crime Scene Trauma Technician

The Fire Department is first responder to all NPDES related spills and incidents and assumes primary responsibility for all such incidents with the exception of single family or duplex residential sewage spills, which may be handed over to Environmental or Crime Scene Cleanup How To Become A Crime Scene Trauma Technician Building and Safety division  read more..

How To Get Hold Of Black Mold

Molds are a normal part of the environment, and are naturally present in both indoor and outdoor environments year round. molds are fungi, with thousands of known species, and there aremold of virtually every color. molds produce tiny cells or "spores" that spread throughout the air. These spores  read more..

How To Get Water Out Of A Flooded Basement

a cross-section view of an exterior wall, shows one method of sealing masonry  walls with an asphalt-based coating that does not detract from their appearance. In this method, a new masonry veneer Basement Drying How To Get Water Out Of A Flooded Basement is added to the existing veneer after the coating is applied. In addition to m  read more..