Radon Mitigation >> Radon Poisoning Symptoms

Mechanical radon mitigation system monitors, such as manometer type pressure gauges, shall be clearly marked to indicate the range or zone of pressure readings that existed when the system was initially activated. A system description label shall be placed on the mitigation system, the electric service entrance panel, or Radon Poisoning Symptoms other prominent location. 

This label shall be legible from a distance of at least three feet and include the following information: "radon Reduction System," the installer's name, phone number, Radon Poisoning Symptoms and RCP Identification Number, the date of installation, and an advisory that the building should be tested for radon at least every two years or as required or recommended by state or local agencies. 

In addition, Radon Poisoning Symptoms all exposed and visible interior radon mitigation system vent pipe sections shall be identified with at least one label on each floor level. The label shall read, "radon Reduction System." 16 16.5 The circuit breakers controlling the circuits on which the radon vent fan and system failure warning devices operate shall be labeled "radon System." 

POST-MITIGATION TESTING 17.1 After installation of an active radon control system (e.g., SSD), the contractor shall re-examine and Radon Poisoning Symptoms verify the integrity of the fan mounting seals and all joints in the interior vent piping. 17.2 After installation of any active radon mitigation system, the contractor shall measure suctions or flows in system piping or ducting to assure that the system is operating as designed. 

When SSD systems are installed and activated, a test of pressure field extension is a good practice, particularly when there is uncertainty regarding the permeability of materials under all parts of the slab.) 17.3 Immediately after installation and Radon Poisoning Symptoms activation of any active (fan-powered) sub- slab depressurization or block wall depressurization system in buildings containing natural draft combustion appliances, the building shall be tested for backdrafting of those appliances. 

Backdrafting condition that results from installation of the radon mitigation system shall be corrected before the system is placed in operation. (Procedures and Radon Poisoning Symptoms a checklist for conducting backdrafting tests are covered in the reference documents listed in paragraphs 8.9, 8.10, and 8.11, and in paragraph 11.3.) 

Upon completion of radon mitigation work, Radon Poisoning Symptomsa test of mitigation system effectiveness shall be conducted using an RMP listed test device and in accordance with EPA testing protocols or state requirements. This test should be conducted no sooner than 24 hours nor later than 30 days following completion and activation of the mitigation system(s). 

This test may be conducted by the contractor, by the client, or by a third party testing firm. If this test is conducted by the mitigation contractor, and the test results are accepted by the client as satisfactory evidence of system effectiveness, further post-mitigation testing is not required. However, to avoid the appearance of conflict of interest, Radon Poisoning Symptoms the contractor shall recommend to the client that a mitigation system effectiveness test be conducted by an independent RMP listed or state certified testing firm or by the client. 

The contractor should request a copy of the report of any post-mitigation testing conducted by the client or by an independent testing firm. 17.5 To ensure continued effectiveness of the radon mitigation system(s) installed, Radon Poisoning Symptoms the contractor shall advise the client to retest the building at least every two years or as required or recommended by state or local authority. 

Retesting is also recommended if the building undergoes significant alteration. AND 18.0 CONTRACTS DOCUMENTATION 18.1 EPA recommends that contractors provide the following written Radon Poisoning Symptoms information to clients prior to initiation of work:

Smoke Damage From A House Fire

Damaged, or "mutilated" currency may be mailed or personally delivered to the Bureau of Engraving and Printing. When mutilated currency is submitted, a letter should be included stating the estimated value of the currency and an explanation of how the currency became mutilated. Each case is carefull  read more..

Flood Damage

You come home and you hear water running and the first thing you think to yourself, ,"my basement has been flooded." Now, of course, having water in your basement is more than just a nuisance, it can be a health issue. Especially, if your basement includes finished living areas. When you have   read more..

Emergency Board Up_Emergency Procedures For Storms


Levees & Dams- Levees are designed to protect hold back a certain level of water. However, levees can and do fail; and when they fail, they can fail catastrophically. Weakening of levees over time, or as a result of weather events exceeding the levee's level of support, can  read more..

How To Restore Flood Damaged Photos

The first formulation of standards of practice and professional relations by any group of art conservators was produced by the IIC-American Group (now AIC) Committee on Professional Standards and Procedures. Document restoration How To Restore Flood Damaged Photos

Formed at the second regular meeting of the IIC-AG, in  read more..

Do It Yourself Flooded Basement Dehumidification

As a result, the heat released by water condensation will compensate water-evaporation provoked temperature decline and enhanced water evaporation. The total heat exchange area of 124 copper tubes in this experiment is 4.5 m2. To enhance the water productivity and heat efficiency, capillary tubing b  read more..

Radon In Water

radon gas can enter a home from the soil through cracks in concrete floors and walls, floor drains, sump pumps, construction joints, and tiny cracks or pores in hollow-block walls. Radon Mitigation Radon In Water levels are generally highest in basements and ground floor rooms that are in contact with the soil. Factors such   read more..

Risks Of Being A Crime Scene Clean Up Technician

Crime scene processing will begin after incident stabilization of the scene. Incident command priorities of life safety, search and rescue, and security precede crime scene preservation and processing. (05/15/96) Only the Watch Commander or Crime Scene Cleanup Risks Of Being A Crime Scene Clean Up Technician on-scene investigative supervisor can relinq  read more..

Storm Damage Trees Cleanup

A wind storm that blew through California on November 30 caused widespread damage to several areas of the Inyo National Forest and adjacent public lands. From Mount Whitney to Tioga Pass, thousands of trees were affected by the storm. Even with the monumental work accomplished in 2012, Wind Damage Storm Damage Trees Cleanup&nbs  read more..

Repair Audio Amplifiers

There are two different ways that MnO2 promotes self-healing. First, there is a thermodynamic tendency for oxygen in the dielectric to slowly diffuse into the pure tantalum substrate metal that supports it. This tendency is encouraged, exponentially, Electronic Restoration Repair Audio Amplifiers by temperature and the presence of  read more..

Water Extration Equipment For Roof Leaks

Does the State have a list of professional mold contractors?New York does not certify or license building contractors, Water Extraction Water Extration Equipment For Roof Leaks including mold contractors. 

If youhire a contractor to work on your flooded home and your home was built before 1978, checkwhether t  read more..