Water Damage >> Mold Mitigation

If there has been a lot of water damage, and/or mold growth covers more than 10 square feet, consult EPA's Mold Remediation in Schools and Commercial Buildings. Although focused on schools and commercial buildings, this Mold Mitigation document is applicable to other building types. If you choose to hire a contractor (or other professional service provider) to do the cleanup, make sure the contractor has experience cleaning up mold.

  1. Check references and ask the Mold Mitigation contractor to follow the recommendations in EPA's Mold Remediation in Schools and Commercial Buildings, the guidelines of the American Conference of Governmental Industrial Hygenists (ACGIH), or other guidelines from professional or government organizations. If you suspect that the heating/ventilation/air conditioning (HVAC) system may be contaminated with mold (it is part of an identified moisture problem, for instance, or there is mold near the intake to the system), consult before taking further action. Do not run the HVAC system if you know or suspect that it is contaminated with mold - it could spread mold throughout the building.
  2. If the Mold Mitigation and/or mold damage was caused by sewage or other contaminated water, then call in a professional who has experience cleaning and fixing buildings damaged by contaminated water. If you have health concerns, consult a health professional before starting cleanup. The tips and techniques presented in this section will help you clean up your mold problem. Professional cleaners or remediators may use methods not covered in this publication. Please note that mold may cause staining and cosmetic Mold Mitigation. It may not be possible to clean an item so that its original appearance is restored.
  3. Mold growing on the underside of a plastic lawn chair in an area where rainwater drips through and deposits organic material. Click on the image for a larger version. Mold growing on a piece of ceiling tile. Fix plumbing leaks and other water problems as soon as possible. Dry all Mold Mitigation items completely. Scrub mold off hard surfaces with detergent and water, and dry completely. Absorbent or porous materials, such as ceiling tiles and carpet, may have to be thrown away if they become moldy. Mold can grow on or fill in the empty spaces and crevices of porous materials, so the mold may be difficult or impossible to remove completely.
  4. Avoid exposing yourself or others to mold (see discussions: what to wear when cleaning mold and hidden mold. Do not paint or caulk moldy surfaces. Clean up the mold and dry the surfaces before painting. Paint applied over moldy surfaces is likely to peel. If you are unsure about how to clean an Mold Mitigation item, or if the item is expensive or of sentimental value, you may wish to consult a specialist. Specialists in furniture repair, restoration, painting, art restoration and conservation, carpet and rug cleaning, water damage, and fire or water restoration are commonly listed in phone books. Be sure to ask for and check references. Look for specialists who are affiliated with professional organizations.

Fire Damage

Any case of fire damage that the fire department or the use of fire sprinklers have been involved will require a certain amount of Dehumidification Fire Damage. When a typical fire breaks out and the fire department arrives, in almost every case water will be employed to put out the fire. The utilization of the water  read more..

The Effects Of Breathing Raw Sewage

Sewage Backup For the purpose of this Emergency Action Plan (EAP), a sewage backup means the overflow of sewage from equipment or plumbing facilities within a food establishment.The Food Code defines sewage as liquid waste that contains animal or vegetable matter in suspension or solution and may al  read more..

Florida Wind Damage Causing Tree Removal

We reported that these capability gaps are exacerbated by the need for a clear and consolidated body of PA guidance, and highlighted debris issues specifically in the following summary: FEM's policy on debris removal is unclear and thus open Wind Damage Florida Wind Damage Causing Tree Removal to interpretation. 

  read more..

General Mold Cleanup Procedures

General Mold Cleanup Procedures Identify and correct the moisture source Clean, disinfect, and dry the moldy area Bag and dispose any material that has moldy residues, such as rags, paper, leaves, or debris What can I save? What should I toss? Substances that are porous and can trap molds, such as p  read more..

What Are The Dangers Of Sewage Backups

Use of root remover products - A number of root remover products are available commercially. Be sure to follow all of the manufacturer's instructions. Although these products may not completely eliminate the growth, they may increase the interval between Sewage Cleanup What Are The Dangers Of Sewage Backups needed rodding. 3. Sewer pipe   read more..

How To Report Meth Labs

Dispose of all contaminated contents in a sanitary landfill. Structural Cleaning: (a) HEPA vacuum porous building materials such as concrete block, brick,raw wood studs, wooden floors and all floors under Meth Lab Cleanup How To Report Meth Labs removed carpeting. (b) Double wash withdetergent and hot water, followed by a thoroug  read more..

Tools For Restoring Fire Damaged Electronics

While the conductivity of some conducting polymers may be as much as 100 times higher than that of MnO2, the improvement in capacitor ESR is not this dramatic. What is typically seen is reduction of capacitor ESR by a factor of between 2 and 4. The discrepancy is due to several factors. First,   read more..

State Laws On Crime Scene Cleanups In Michigan

Moreover, it was not clear whether "reasonably anticipated" from the first sentence meant the same as "reasonably expected" in the second sentence. Some commenters found the language contradictory in that there might be situations where the exposures are incidental or infrequent yet reasonably antic  read more..

Get Homeowner Insurance To Pay For Mold Damage

In order to limit your exposure to airborne mold spores, you may want to wear an N-95 respirator, available at many hardware stores and from companies that advertise on the Internet (they cost about $12 to $25). Some N-95 respirators resemble a paper dust mask with a nozzle on the front; others are   read more..

How To Conserve And Restore Old Paper

Few commercially available adhesives meet these criteria. Commercial library and wallpaper pastes may lose hold as they age, and they often contain harmful additives. Rubber cement and Document restoration How To Conserve And Restore Old Paper animal glues darken and stain. 

Several synthetic adhesives, such as "wh  read more..