Smoke Damage >> Guidelines For Fire And Smoke Damage Repair

If you suspect someone has heat stroke, follow these instructions: Immediately call for medical attention. Get the person to a cooler area. Cool the person rapidly by immersing him/her in cool water or a cool shower, or spraying or sponging him/her with cool water. If the humidity is low, wrap the person in a cool, wet sheet and Guidelines For Fire And Smoke Damage Repair fan him/her vigorously. 

Monitor body temperature and continue cooling efforts until the body temperature drops to 101-102°F. Do not give the person alcohol to drink. Get medical assistance as soon as possible. If emergency medical personnel do not arrive quickly, Guidelines For Fire And Smoke Damage Repair call the hospital emergency room for further instructions.

For more information, Guidelines For Fire And Smoke Damage Repair visit the Working in Hot Environments and Heat Stress. For more information on heat-related illnesses and treatment, see the CDC Web page on Extreme Heat. Water cooler than 75ºF (24ºC) removes body heat more rapidly than can be replaced. The result is hypothermia. To avoid hypothermia: Wear high rubber boots in water. 

Ensure clothing and boots have adequate insulation. Avoid working alone. Take frequent breaks out of the water. Change into dry clothing when possible. Never assume that fire-damaged structures, walkways, sidewalks, parking lots and roads are stable. These may have structural damage and Guidelines For Fire And Smoke Damage Repair can be dangerous. 

Do no work around any fire-damaged structure until it is examined and Guidelines For Fire And Smoke Damage Repair certified safe for work by a registered engineer or architect. Assume all stairs, floors and roofs are unsafe until inspected. Leave the structure immediately if it shifts or unusual noises signal a possible collapse.For more information, visit the Structural Collapse web page.

Hazardous Materials Tanks, drums, pipes, or equipment that may contain hazardous materials such as pesticides or propane may be damaged. Do not move displaced containers without first contacting the local fire department or hazardous materials team. Wear appropriate protective clothing and Guidelines For Fire And Smoke Damage Repair respirators if working in potentially contaminated areas to avoid touching or breathing in vapors. 

For more information about respirators, visit the Respirators topic page. Visit the NIOSH web page for information about proper safety equipment. Or call NIOSH at (800) 311- 3435. Frequently and Guidelines For Fire And Smoke Damage Repair thoroughly wash skin that may have been exposed to pesticides and other hazardous chemicals.For more information, visit: Pocket Guide to Chemical Hazards Chemical Safety  

Fire can still pose a major threat to an already badly damaged area. Heat sources from smoldering wood or Guidelines For Fire And Smoke Damage Repair other debris could cause fire again. Contact with something flammable or oxygen can re-ignite materials. Workers must take extra precautions.At least two fire extinguishers, each with a UL rating of at least 10A, should be provided at every cleanup job.

Working in Confined Spaces A confined space has one or more of the following features: openings for entry or Guidelines For Fire And Smoke Damage Repair exit are limited air flow is limited the space is not designed to be occupied by workers for a long period of time Confined spaces can include these: boiler furnace pipeline pit pumping station septic tank sewage digester storage tank utility vault well basement

Confined areas may have toxic gases, a lack of oxygen, or explosive conditions. These make them potentially deadly areas. Many toxic gases and vapors cannot be seen or smelled. Never trust your senses to decide whether an area is safe. Never enter a confined space unless you have been properly trained, even to rescue a fellow worker. 

Contact your local fire department for help if you need to enter a confined space and do not have proper training and Guidelines For Fire And Smoke Damage Repair equipment.For more information, visit the Confined Spaces web page.Worker Fatigue Stress, long hours, and fatigue may increase the risk of injury and illness. These are often combined with emotional and physical exhaustion, losses from damaged homes and temporary job layoffs.

Workers exposed to stress are at greater risk for injury and emotional crisis and stress-caused illnesses and disease. People working in all phases of cleanup can reduce injury and illness in these ways: Accept emotional support from family members, neighbors, and Guidelines For Fire And Smoke Damage Repair local mental health care workers to help prevent more serious stress-related problems.

If family and neighbors cannot give emotional support, Guidelines For Fire And Smoke Damage Repair see a community health or mental health care worker. Set priorities for cleanup tasks and pace work over days or weeks to avoid physical exhaustion. Rest and take frequent breaks BEFORE exhaustion builds up. Begin a normal sleep schedule as quickly as possible. 

Take advantage of disaster relief programs and Guidelines For Fire And Smoke Damage Repair services in your community.For more information, visit: Traumatic Incident Stress: Information For Emergency Response Workers Stress at Work Respiratory Hazards Cleanup workers may be exposed to ash, soot and break-down products from burned material that may irritate airways and otherwise affect breathing. 

Spoiled and wet plants and other organic material can grow a lot of bacteria and mold during warm weather. Breathing bacteria and Guidelines For Fire And Smoke Damage Repair organic dust may cause lung disease. Use proper engineering controls to exhaust and replenish enough fresh air when working indoors.o Use a high efficiency particulate air (HEPA)-type vacuum when cleaning dust. 

A typical household vacuum can put dust back into the air.o When exposure to dust cannot be controlled or avoided, Guidelines For Fire And Smoke Damage Repair use a well-fitted, NIOSH-certified air-purifying respirator (such as an N-95 or more protective respirator) to reduce the effects of dust.First Aid First aid, even for minor cuts and burns, is extremely important as workers are exposed to smoke and burned material. 

If someone is injured, contact a physician to determine the necessary type of treatment. Immediately clean all open wounds and cuts with soap and clean water. Except for minor scratches, Guidelines For Fire And Smoke Damage Repair some cuts may need treatment to prevent tetanus.Protective Equipment Ensure you have access to these personal protective equipment items: hard hats goggles or safety glasses heavy work gloves ear plugs boots with steel toes

If working near downed power lines: Nomex® clothing compliant with NFPA standard 1500 rubber gloves dielectric overshoes use protective tools such as insulated sticks and cable cutters Noise from these types of equipment may cause ringing in the ears and Guidelines For Fire And Smoke Damage Repair subsequent hearing damage. chain saws back hoes tractors pavement breakers blowers dryers When shouting is necessary to be heard over noise, wear earplugs or other hearing protection devices.

Wildlife Damage Management Techniques

Tips to Eliminate Wildlife Conflicts Prevent and Control Wildlife Issues on Your Property Below are general tips intended to help landowners REPEL or prevent and control Animal Damage Wildlife Damage Management Techniques problems with wild animals. The best   read more..

Cut Drywall To Remove Mold

Moisture problems and their solutions differ from one climate to another. The Northeast is cold and wet; the Southwest is hot and dry; the South is hot and wet; and the Western Mountain states are cold and dry. All of these regions can have moisture problems. For example, Mold Remediation Cut Drywall To Remove Mold evaporative   read more..

Bee Removal

Removing a nest of bees can be a challenging and dangerous undertaking, the utmost caution is advised. If you do not possess the right kind of equipment or the know-how this job might be well served to be left to the professionals. Depending on which part of the country that you live in, beca  read more..

Radon Mitigation

One of the more efficient ways to provide a drying mechanism to a Crawl Space Drying Radon Mitigation is to condition a crawl space by the use of heating and cooling and the crawl space as if the crawl space is just another part of the home. Crawl spaces need to always have a good ground cover that will prevent evaporation   read more..

How To Clean A Dirt Basement After Flooding

In Two Harbors, the owners of a home built in 1920 and added on to in 1988 decided to fix their cold basement with an exterior insulation retrofit. The house is located in a rural area with clay/gravel Basement Drying How To Clean A Dirt Basement After Flooding soils, and the basement had no evidence of moisture intrusion from groundwater. Physical  read more..

How To Get Rid Of Asbestos Material In California

This information will help you understand asbestos: what it is, its health effects, where it is in your home, and what to do about it. Even if asbestos is in your home, this is usually NOT a serious problem. The mere presence of asbestos in a home or a building is not hazardous. The danger is that a  read more..

Water Damage Mitigation After Flood

Expertise in environmental inorganic and organic chemistry and bio geochemistry. Increase understanding of aquatic-ecosystem health by enhancing technical associations with regulatory agency program managers, government-agency researchers, Water Extraction Water Damage Mitigation After Flood and other research groups. 

  read more..

Electronic Restoration

This article ascertains appropriate sewage clean-up processes and safety standards to abide by during a sewage cleanup and Sewage Cleanup Electronic Restoration efforts. These processes are created to protect water restoration cleanup technicians, the public, and our environment from the possible harmful effects connected wit  read more..

Mold Cleanup Procedures

MOLD/WATER DAMAGED MATERIALS Key Engineering Controls and Work Practices Discard all water-damaged materials, materials that are visibly coated with mold that cannot be properly cleaned, such as porous materials (e.g., carpeting, drywall, insulation), Mold Remediation Mold Cleanup Procedures and materials that have been  read more..

How To Treat Mold On Dirt Crawl Space Floors

In addition to reducing heating costs, a properly insulated foundation will keep below-grade rooms more comfortable and prevent moisture problems, insect infestation, and radon infiltration. In new construction, consider construction techniques that provide both foundation structure and insulat  read more..