Lead Paint Removal >> Lead Paint Removal Products

If the need for lead paint abatement can be clearly demonstrated, and if the contaminated features and finishes are important to the preservation of the property's historic character, the following priorities should be used. These are ranked on the principle of minimal intervention.1. Removal of lead from architectural features in situ, using safe measures that do not put excessive amounts of lead dust or Lead Paint Removal Products residue into the environment. 

Appropriate measures are evaluated below.2. Removal of architectural features from the building and Lead Paint Removal Products controlled removal of lead paint off-site; followed by replacement of the treated features in their original locations. 3. Containment or encapsulation of features using non-destructive methods. 

When lead based paint is present on flat plaster walls and ceilings, these features can be encapsulated with dry wall or sheetrock. When lead-based paint is present on simple floors, Lead Paint Removal Products sealing the surface and covering the floors with carpeting that meets abatement criteria may be considered appropriate from a preservation perspective. 

Conventional wallpaper and new layers of paint have little or Lead Paint Removal Products no encapsulation value. 4. Removal of contaminated features and replacement with in-kind replications. If permanent removal of contaminated features is unavoidable, in-kind replication may be an acceptable alternative. 

Such an approach should be considered only when the loss of the features would not seriously undermine the integrity of the historic property.If contaminated features and Lead Paint Removal Products finishes are determined to be not important for the preservation of the property's historic character, removal of contaminated features without replacement in kind may be appropriate.

Recommended Procedures for Removing Lead Paint on Historic Surfaces Removal of lead-based paint from significant historic features should only be considered if it is demonstrated that the features are contaminated above regulated levels, Lead Paint Removal Products and that the contamination is reasonably accessible to building occupants. 

The cheapest methods for removing lead-based paint are usually not appropriate for older buildings. Poorly chosen paint removal methods can lead to a loss of significant architectural features, damage to wood and plaster, Lead Paint Removal Products or loss of early paint schemes. Speed is no substitute for quality. The dangers associated with removing lead-based paint demand careful planning and execution.

The following procedures are recommended when on-site abatement procedures are indicated.1. Restrict entry to the work area. Only workers directly involved in the project should enter the work area. Young children and pregnant women must stay out of the Lead Paint Removal Products work area until cleanup has been completed. 

Warning signs should be posted outside all entrances and exits to the work area. For any project involving abatement of lead hazards in a residence, or involving removal of more than a very limited amount of lead paint, it is advised that all residents of that home, including pets, Lead Paint Removal Products find other housing. Residents are advised stay out of the building until cleanup has been completed. 

2. Select the safest methods for paint removal. Depending on the materials to be treated and Lead Paint Removal Products the specific circumstances of each building, paint removal procedures that will cause the least damage to the historic materials and yet keep lead residue under control should be chosen. Possible methods, with their advantages and disadvantages, are discussed in detail below.

3. Wear appropriate clothing. Disposable coveralls are recommended to minimize contamination of clothing by lead dust. Disposable shoe covers, to prevent tracking of lead dust outside of the work area, Lead Paint Removal Products are recommended. Neoprene or butyl gloves are indicated when working with methylene-chloride based chemicals.

4. Use required safety equipment. A respirator is recommended. If any lead dust or lead fumes will be produced, Lead Paint Removal Products a respirator with appropriate filters is necessary. 5. Do not smoke, eat, or drink in the work area. Lead dust can easily settle on food or cigarettes. All workers involved in projects must leave the work area and wash hands and faces before eating, drinking, or smoking.

6. Contain lead dust and debris within the work area. While it may not be possible to control all lead dust, simple measures can greatly reduce the degree of contamination. Plastic sheeting (six-mil polyethylene) sealed at its edges with duct tape, for example, is effective in keeping most lead dust within the immediate work area, Lead Paint Removal Products where it can be picked up with HEPA vacuuming. 

Furniture, rugs, plants, and other items can be removed from the work area prior to beginning treatment. 7. Change clothes, wash hands and face. All persons involved in treatment procedures must take care not to carry dust-contaminated clothing into Lead Paint Removal Products cleaner environments.8. Clean up. Recommended measures for cleanup after lead abatement procedures should consist of High Efficiency Particulate Air (HEPA) vacuuming and washing with tri-sodiumphosphate (TSP) solution. 

Ordinary household vacuum cleaners will not pick up most lead dust. Recommended cleanup specifications are outlined below. A. Interior spaces must be cleaned from ceiling to floor by at least two passes of HEPA vacuuming and Lead Paint Removal Products wet sponge mopping with TSP solution. New batches of TSP must be mixed often to avoid redepositing lead particles. 

After inspection, abated surfaces should be recoated with appropriate finishes before the spaces are returned to use. If substantial amounts of lead dust were generated by the abatement procedures, Lead Paint Removal Products routine washing with TSP solution is indicated for several weeks after the abatement. B. Exterior abatement procedures should be preceded by masking ground surfaces with six mil polyethylene, carefully secured to the building. 

Thorough exterior cleanup should take place at the end of every work day. Lead dust from sanding, residue, and Lead Paint Removal Products paint chips should be collected by HEPA vacuuming. Building surfaces should be washed twice with TSP solution. The top layer of polyethylene masking should be removed at the end of each work day and disposed of properly.

C. Tools, equipment, supplies and materials should not be removed from the site once lead abatement has begun, Lead Paint Removal Products unless they have been decontaminated with HEPA vacuuming and TSP washing. Upon completion of a project, all equipment that cannot be cleaned should be wrapped and sealed in two layers of four mil polyethylene and disposed of properly, along with all sponges, rags, mop heads, and other abatement materials.

D. All lead dust, paint chips, equipment, supplies and materials used in abatement should be considered hazardous waste and Lead Paint Removal Products disposed of in accord with local regulations. 9. Dispose of toxic Wastes in Proper Manner.

Roof Leak Sealer

STORM, FLOOD, AND HURRICANE RESPONSE Guidance on Personal Protective Equipment and Clothing for Flood Cleanup Workers The National Institute for Occupational Safety and Health (NIOSH) provides the following guidelines and warnings to flood cleanup workers. The hazards in flood waters are likely vari  read more..

How To Repair Smoke Damage From Fire

For the second time this month, Fire Damage How To Repair Smoke Damage From Fire another state joined the national movement to enhance public safety by mandating that all cigarettes sold in their state be "fire-safe.” Such cigarettes are less likely to ignite fires if dropped or carelessly discarded.

Tod  read more..

Water Damage

In the case of a severe storm like a tornado or hurricane, the relentless pounding of the wind can cause Emergency Board up Water Damage sometimes allowing the water to come in, through either a broken window, a splintered door or maybe some roof damage. Being proactive and planning ahead by the use of installing plywo  read more..

Remove Paint If You Dont Know If It Contains Lead

The standard also provides for a program of biological monitoring and medical surveillance for all employees exposed to levels of inorganic lead above the action level of 30 µg/m3 (TWA) for more than 30 days per year. The purpose of this document is to outline the medical surveillance provisions   read more..

Flood Damage

Even if you had taken effort to cover your house from flooding, you may still require Wind Damage Flood Damage insurance if you reside in a floodplain. Homeowner’s policies might not cover wind damage, so you will probably be required to buy another policy from the National Flood Insurance Program (NFIP).   read more..

Get Rid Of A Musty Smell From The Crawlspace

Moisture can enter a home as water vapor and as liquid water. Sealing air leaks and providing paths for liquid water to move away from the building can prevent moisture from causing health and comfort problems in your home. Crawl Space Drying Get Rid Of A Musty Smell From The Crawlspace Of these three, air movement accounts for more than 98% of al  read more..

Start A Radon Testing Business

PROGRAM REQUIREMENTS FOR MEASUREMENT SERVICE PROVIDERS Adherence to all of the following requirements constitutes an EPA-conforming measurement.Participants involved in measurements for real estate transactions must also follow all procedures described in this section (Section 4.2), as well as those  read more..

After Roof Collapse

The standard provides flood, wind, and seismic resistant installation procedures. It also calls for elevating A Zone manufactured homes with the bottom of the main chassis frame beam at or above the BFE, not with the top of the floor at the BFE. How High Above the BFE Should a Building be Structural Drying After Roof Collapse&  read more..

Mold Remediation

Standing water is a breeding ground for a wide range of micro-organisms and insects, such as mosquitoes. Mosquitoes can spread diseases like West Nile Virus. Micro-organisms, including bacteria and mold, can become airborne and be inhaled. Where floodwater is highly infected, infectious diseas  read more..

Will A Dehumidifier Stop A Musty Smell

Technical data on design operating inlet and outlet conditions, air flows with diagram showing air volumes and conditions throughout the system, dehumidification capacity, filtration and fan motor and electrical power data. A general arrangement diagram with overall Dehumidification Will A Dehumidifier Stop A Musty Smell dimensions showing all   read more..