Lead Paint Removal >> Lead Paint Removal Products

If the need for lead paint abatement can be clearly demonstrated, and if the contaminated features and finishes are important to the preservation of the property's historic character, the following priorities should be used. These are ranked on the principle of minimal intervention.1. Removal of lead from architectural features in situ, using safe measures that do not put excessive amounts of lead dust or Lead Paint Removal Products residue into the environment. 

Appropriate measures are evaluated below.2. Removal of architectural features from the building and Lead Paint Removal Products controlled removal of lead paint off-site; followed by replacement of the treated features in their original locations. 3. Containment or encapsulation of features using non-destructive methods. 

When lead based paint is present on flat plaster walls and ceilings, these features can be encapsulated with dry wall or sheetrock. When lead-based paint is present on simple floors, Lead Paint Removal Products sealing the surface and covering the floors with carpeting that meets abatement criteria may be considered appropriate from a preservation perspective. 

Conventional wallpaper and new layers of paint have little or Lead Paint Removal Products no encapsulation value. 4. Removal of contaminated features and replacement with in-kind replications. If permanent removal of contaminated features is unavoidable, in-kind replication may be an acceptable alternative. 

Such an approach should be considered only when the loss of the features would not seriously undermine the integrity of the historic property.If contaminated features and Lead Paint Removal Products finishes are determined to be not important for the preservation of the property's historic character, removal of contaminated features without replacement in kind may be appropriate.

Recommended Procedures for Removing Lead Paint on Historic Surfaces Removal of lead-based paint from significant historic features should only be considered if it is demonstrated that the features are contaminated above regulated levels, Lead Paint Removal Products and that the contamination is reasonably accessible to building occupants. 

The cheapest methods for removing lead-based paint are usually not appropriate for older buildings. Poorly chosen paint removal methods can lead to a loss of significant architectural features, damage to wood and plaster, Lead Paint Removal Products or loss of early paint schemes. Speed is no substitute for quality. The dangers associated with removing lead-based paint demand careful planning and execution.

The following procedures are recommended when on-site abatement procedures are indicated.1. Restrict entry to the work area. Only workers directly involved in the project should enter the work area. Young children and pregnant women must stay out of the Lead Paint Removal Products work area until cleanup has been completed. 

Warning signs should be posted outside all entrances and exits to the work area. For any project involving abatement of lead hazards in a residence, or involving removal of more than a very limited amount of lead paint, it is advised that all residents of that home, including pets, Lead Paint Removal Products find other housing. Residents are advised stay out of the building until cleanup has been completed. 

2. Select the safest methods for paint removal. Depending on the materials to be treated and Lead Paint Removal Products the specific circumstances of each building, paint removal procedures that will cause the least damage to the historic materials and yet keep lead residue under control should be chosen. Possible methods, with their advantages and disadvantages, are discussed in detail below.

3. Wear appropriate clothing. Disposable coveralls are recommended to minimize contamination of clothing by lead dust. Disposable shoe covers, to prevent tracking of lead dust outside of the work area, Lead Paint Removal Products are recommended. Neoprene or butyl gloves are indicated when working with methylene-chloride based chemicals.

4. Use required safety equipment. A respirator is recommended. If any lead dust or lead fumes will be produced, Lead Paint Removal Products a respirator with appropriate filters is necessary. 5. Do not smoke, eat, or drink in the work area. Lead dust can easily settle on food or cigarettes. All workers involved in projects must leave the work area and wash hands and faces before eating, drinking, or smoking.

6. Contain lead dust and debris within the work area. While it may not be possible to control all lead dust, simple measures can greatly reduce the degree of contamination. Plastic sheeting (six-mil polyethylene) sealed at its edges with duct tape, for example, is effective in keeping most lead dust within the immediate work area, Lead Paint Removal Products where it can be picked up with HEPA vacuuming. 

Furniture, rugs, plants, and other items can be removed from the work area prior to beginning treatment. 7. Change clothes, wash hands and face. All persons involved in treatment procedures must take care not to carry dust-contaminated clothing into Lead Paint Removal Products cleaner environments.8. Clean up. Recommended measures for cleanup after lead abatement procedures should consist of High Efficiency Particulate Air (HEPA) vacuuming and washing with tri-sodiumphosphate (TSP) solution. 

Ordinary household vacuum cleaners will not pick up most lead dust. Recommended cleanup specifications are outlined below. A. Interior spaces must be cleaned from ceiling to floor by at least two passes of HEPA vacuuming and Lead Paint Removal Products wet sponge mopping with TSP solution. New batches of TSP must be mixed often to avoid redepositing lead particles. 

After inspection, abated surfaces should be recoated with appropriate finishes before the spaces are returned to use. If substantial amounts of lead dust were generated by the abatement procedures, Lead Paint Removal Products routine washing with TSP solution is indicated for several weeks after the abatement. B. Exterior abatement procedures should be preceded by masking ground surfaces with six mil polyethylene, carefully secured to the building. 

Thorough exterior cleanup should take place at the end of every work day. Lead dust from sanding, residue, and Lead Paint Removal Products paint chips should be collected by HEPA vacuuming. Building surfaces should be washed twice with TSP solution. The top layer of polyethylene masking should be removed at the end of each work day and disposed of properly.

C. Tools, equipment, supplies and materials should not be removed from the site once lead abatement has begun, Lead Paint Removal Products unless they have been decontaminated with HEPA vacuuming and TSP washing. Upon completion of a project, all equipment that cannot be cleaned should be wrapped and sealed in two layers of four mil polyethylene and disposed of properly, along with all sponges, rags, mop heads, and other abatement materials.

D. All lead dust, paint chips, equipment, supplies and materials used in abatement should be considered hazardous waste and Lead Paint Removal Products disposed of in accord with local regulations. 9. Dispose of toxic Wastes in Proper Manner.

Earthquake Damage

This article is on the subject of Smoke Damage Earthquake Damage from an investigation on the education of dangerous defense techniques for water restoration companies. One important factor is to think about earthquake and earthquake caused dangers like fire and smoke. This article is concentrated on an earthquake and  read more..

FEMA Map

If my community is not participating in the CRS, what can I do to have my community join? The decision to join the CRS is a voluntary action of a community's elected officials. As with many community actions, citizens can contact their local elected officials and encourage the community to consider   read more..

Removing Smoke Odors From Fire damaged Furniture

The nonprofit NFPA's (National Fire Protection Association) Fire Safety Educational Memorial Fund Committee last month named the Seattle Hazmat Response Team, Seattle, Fire Damage Removing Smoke Odors From Fire damaged Furniture Washington as the 2004 recipient of the Warren E. Isman Educational Grant.

The team will use the grant to atten  read more..

Prevention And Control Of Wildlife Damage

The Forest Service gives notice of and requests comment on proposed revisions to its policy on animal damage management to be published in the Forest Service Manual Chapter 2650. This Animal Damage Prevention And Control Of Wildlife Damage direction would replace current agency procedures for im  read more..

Leaking Hot Water Heater Bottom

Without a thermal expansion tank, the water pressure in a water heater could build to a very high level and cause leakage at the pressure relief valve (or pop-off valve) located on the water heater. Lime deposits could build up on a leaking pop-off valve and clog this safety device, Water Damage Leaking Hot Water Heater Bottom w  read more..

Home Remedies To Rid Lawns Of Small Animals

Shooting is more effective as a dispersal technique than as a way to reduce starling numbers. The number that can be killed by shooting is generally very small in relation to the number involved in damage situations. Usually only a few dozen birds can be shot from individual flocks that can number a  read more..

Get Rid Of A Dead Animal Smell In The Wall

Simply banging on the ceiling, wall, or floor in the vicinity of the animal may cause it to vacate; also, your initial search for young may have already made the animal uncomfortable enough to leave.Alternatively, with a powerful flashlight or headlamp containing fresh batteries, and Odor Control Get Rid Of A Dead Animal Smell In The Wall weari  read more..

Fema Debris Disposal And Flood Zones

Household Chemicals (i.e., Household Hazardous Waste (HHW)) can be taken to a county or municipal HHW facility for recycling or potentially reuse. Check with your local environmental health representative to see if a temporary HHW collection site has been established. If HHW cannot safely be removed  read more..

Remove Lead Paint From Concrete

Lead is one of the most significant and widespread environmental hazards for children in Maryland. Children are at greatest risk from birth to age six while their neurological systems are developing. Sustained exposure to lead can cause long lasting neurological damage or death. Effects of sustained  read more..

Information About Lead In The Workplace Californ

Information About Lead in the Workplace Occupational Lead Poisoning Prevention Program (OLPPP) Occupational Health Branch, California Department of Public Health (CDPH) OLPPP provides information on lead in the workplace as well as educational and training materials for workers, employers and [  read more..