Dehumidification >> How Does A Dehumidifier Work

Principal Findings and Significance This experimental study focuses on parametric trends in the freshwater-production rate, i.e., how the production rate of freshwater is affected by changes in the various thermal/fluid parameters. We are particularly interested in how the freshwater-production rate is affected by the heat input to the How Does A Dehumidifier Work saltwater held in the storage tank. 

Experimental results from this study are summarized in Figure 3 which lots the fresh water production rate, How Does A Dehumidifier Work in gallons per hour (GPH), as a function of the heater power (in kW) input to the saltwater. Three heating-power input levels are tested: 2.65, 3.60, and 4.45 kW. Flow rate of the heated saltwater is fixed at 2 gallons per minute (GPM) and flow rate of the cooled freshwater is fixed at 1.5 GPM. 

Temperatures of the saltwater at the inlet of the evaporator are 51°C for 2.65 kW of heater power, How Does A Dehumidifier Work 55.5°C for 3.6 kW, and 59°C for 4.45 kW. Temperatures of the cooled freshwater at the inlet of the condenser range from 17.5°C to 19.5°C, increasing only slightly with increased heater power. Air velocity has a fixed value of about 6.2 m/s.  

3. Experimental freshwater-production rate vs. heater-power input to the saltwater. Figure 3 shows How Does A Dehumidifier Work that the freshwater-production rate increases with increasing heater-power input. This implies that increased solar-radiation capture will lead to higher freshwater production rates in actual solar-energy-driven desalination systems. 

Figure 3 further reveals that the relationship between the freshwater-production rate How Does A Dehumidifier Work and the heater-power input is fairly linear. To explore the freshwater-production rate per unit of power input the ratio of the freshwater-production rate to the heater-power input is plotted in Figure 4 as a function of the heater-power input. 

The ratio is fairly constant with an average value of 0.348 GPH/kW, which means that for 1 kW of heating-power input the present experimental system is able to produce 0.348 gallon of freshwater per 1 hour. This How Does A Dehumidifier Work production rate to power value is only taking into consideration the heating power. The necessary cooling power is not factored into the calculation. 

In addition, the thermal energy removed during the condensation process was not recovered in the study. It is expected that the freshwater-production rate per unit input heating power will increase if energy recovery technologies are applied. Comparing this average production rate to other conventional electrical devices such as water distillers, How Does A Dehumidifier Work we found congruency between the device and the HDH system. 

A typical 600 W electric distiller can produce 1 gallon of water in 5 hours. This translates to 0.333 GPH/kW which is roughly equal to what the HDH system can produce. From an energy standpoint this is expected. However, How Does A Dehumidifier Work the advantage of the HDH system is that it can be operated from lower grade energy and industrial waste heat. 

The Oahu solar map is examined to explore the estimated freshwater-production rates How Does A Dehumidifier Work if the present lab-scale experimental system is operated outdoors and driven by solar energy. The result is shown in Figure 5. The Ewa plain on the west side of Oahu, Hawaii, is selected as the site of study due to its potential freshwater shortage and expected population growth. 

Figure 5 shows that with 1 square meter of land on the Ewa plain used for solar-energy How Does A Dehumidifier Work collection the present experimental system is able to produce 2.02 gallons of freshwater per day. Figure 5. Oahu’s solar map illustrates the estimated freshwater-production rate and the Ewa plain study area.

The present experimental study also reveals that while the freshwater-production rate decreases How Does A Dehumidifier Work slightly with decreasing air velocity it is not sensitive to variations in the saltwater and freshwater flow rates. Doubling the saltwater or freshwater flow rate does not create a substantial change in freshwater production. 

The experimental results also show very low water production sensitivity toward air flow rate. The difference in water production between different air flow rates is very miniscule and inclusive. After considering variation How Does A Dehumidifier Work and system error, these results are inclusive but demonstrate the weak correlation between the water production and air flow rate. 

In summary, a HDH seawater desalination lab-scale experimental system is designed, constructed, How Does A Dehumidifier Work and tested to prove the concept of the desalination technique. The testing system is able to deliver stable and highly repeatable freshwater production for long-term operations. Results from testing runs indicate that among the many operating parameters the system performance is most affected by the heat input to the saltwater. 

The knowledge we gained through this How Does A Dehumidifier Work project can readily be applied towards developing industrial-scale HDH desalination systems. Approval is requested to enter into a sole source contract with the contractor indicated below to obtain construction services for the "Emergency ACM Abatement and Dehumidification of First and Second Floor", Chet Holifield Federal Building, 24000 Avila Rd., Laguna Niguel, CA 92677. 

2. DESCRIPTION OF SERVICES REQUIRED The construction services required under this justification include emergency ACM abatement, How Does A Dehumidifier Work water damage treatment, dehumidification and drywall repair and painting. The estimated construction cost is $500,120.00 Some of these specialized requirements include, but are not limited to, the following: 

Set up localized containment and install negative air machines How Does A Dehumidifier Work and dehumidifiers within the work areas, throughout 1st and 2nd Floors. Remove all water damaged asbestos containing drywall / joint compound, throughout 1st and 2nd floors. 

If pre-existing mold growth and/or suspect staining is observed during the removal process, How Does A Dehumidifier Work the mold contaminated asbestos containing drywall / joint compound shall be removed 2 ft. beyond any visible extent, throughout 1st and 2nd floors. Apply anti-microbial cleaning agent and scrub framing members with wire brush, 2ft. beyond the extent of visible suspect mold and/or staining. 

The visual presence of continued staining and/or mold growth into adjacent areas warrants the cleaning How Does A Dehumidifier Work and/or removal of the affected materials. All exposed surfaces shall be sanded and/or wire brushed and HEPA Vacuumed until a visually clean surface is achieved. Upon completion wet wipe remediated areas with an anti microbial cleaning detergent and HEPA vacuum a second time. 

All exposed HVAC vents and/or registers shall be cleaned accordingly within the 1st & 2nd floor work areas. Daily & final visual inspections How Does A Dehumidifier Work and onsite air monitoring for asbestos & mold will be conducted by an H2 Environmental representative. Patch, repair, paint drywall for First and Second Floor in contained area. Patch, repair, paint drywall for Third Floor.

Risk Assessment Of Asbestos Removal In Pennsylvani

This is a non-mandatory appendix to the asbestos standards for construction and for shipyards. It describes criteria and procedures for erecting and using negative pressure enclosures for Class I Asbestos Work, when NPEs are used as an allowable Asbestos Abatement Risk Assessment Of Asbestos Removal In Pennsylvani  control method to comply with paragrap  read more..

Remove Black Toxic Mold From The Attic

Although the level of personal protection suggested in these guidelines is based on the total surface area contaminated and the potential for remediator and/or occupant exposure, professional judgment should always play a part in remediation decisions. These remediation guidelines are based on the s  read more..

Water Structural Drying

What is needed to thoroughly extract the adulteration and repair the damage? Shall the entire edifice or a portion of the edifice be evacuated and, if so, for how long? Could semi porous materials be sanitized, or shall they be replaced? What are the costs of using inadequate measures to extr  read more..

Mold Tester Certification

There is substantial visible mold growth inside hard surface (e.g., sheet metal) ducts or on other components of your heating and cooling system. There are several important points to understand concerning mold detection in heating and cooling systems: Many sections of your heating and cooling syste  read more..

How To Clean Up Fingerprint Dusting Powder

Sandi's decontamination foam, developed more than a decade ago for remediation of chemical and biological agents and used to decontaminate federal office buildings and mailrooms during the anthrax attacks in 2001,&nbs  read more..

Remove Smoke Odor From Electronics

One of these rooms (the museum boardroom) was used to store kits of soot cleanup clothing and cleaning materials and supplies and was also used as a staff room and change room. The second and third rooms were designated to receive the first of the salvaged displays and artifacts that would be r  read more..

Remove Toxic Smoke Damage From An Apartment Fire

The newly-created Coalition for Fire-Safe Cigarettes issued a call to the tobacco companies today to produce and sell only "fire-safe ” cigarettes nationwide. Fire Damage Remove Toxic Smoke Damage From An Apartment Fire

The Coalition, which is being launched today, is a national group of fire service members, consumer, e  read more..

Compulsive Hoarding Debris Removal

Although it seems like hoarding has only recently received attention from certain academic studies, it is now considered to be a form of self-neglect. Despite all of the limited data on the scope of the problem, it is thought that as many as one in twenty Americans could have this serious hoa  read more..

Mold Mitigation

These Structural Drying Mold Mitigation tracks are traits of Douglas-fir, pines, spruces and larches and are readily visible to your naked eyes, or under a low power magnifier on the end grains of planks and logs. In ponderosas, white and sugar pines, resin tracks are obviously visible as thin, brown stripes on the surfa  read more..

Can Lead At Work Harm My Child

Can Lead at work harm my child? Yes. Your child can get lead poisoning if you or someone who lives in your home works with lead. Some kinds of work make lead dust or fumes. You cannot see lead dust, but it can get on your hands, face, and clothes. You take lead dust from your job to your family when  read more..