Asbestos Abatement >> How To Remove Asbestos Siding

The following recount criterion is for a pair of counts that estimate AC in fibers/cc. The criterion is given at the type-I error level. That is, there is 5% maximum risk that we will reject a pair of counts for the reason that one might be biased, when the large How To Remove Asbestos Siding observed difference is really due to chance. 

Reject a pair of counts if: Where: AC1 = lower estimated  airborne fiber concentration AC2 = higher estimated airborne fiber concentration ACavg = average of the two concentration estimates (FB) = for the average of the two   concentration estimates If a pair of counts are rejected by this criterion then, recount the rest of the filters in the How To Remove Asbestos Siding submitted set. 

Apply the test and reject any other pairs  failing the test. Rejection shall include a memo to the industrial hygienist stating that the sample failed a statistical How To Remove Asbestos Siding test for homogeneity and the true air concentration may be significantly different than the reported value. 7.4. Reporting Results Report results to the industrial hygienist as fibers/cc. 

Use two significant figures. If multiple analyses are performed on a How To Remove Asbestos Siding sample, an average of the results is to be reported unless any of the results can be rejected for cause. 8. References 8.1. Dreesen, W.C., et al, U.S. Public Health Service: A Study of Asbestosis in the Asbestos Textile Industry, (Public Health Bulletin No. 241), US Treasury Dept., Washington, DC, 1938. 8.2. 

Asbestos Research Council: The Measurement of Airborne Asbestos Dust by the Membrane Filter How To Remove Asbestos Siding Method (Technical Note). Asbestos Research Council, Rockdale, Lancashire, Great Britain, 1969. 8.3. Bayer, S.G., Zumwalde, R.D., Brown, T.A., 

Equipment and Procedure for Mounting Millipore Filters and Counting Asbestos Fibers by Phase Contrast Microscopy, Bureau of Occupational Health, U.S. Dept. of Health, How To Remove Asbestos Siding Education and Welfare, Cincinnati, OH, 1969. 8.4. NIOSH Manual of Analytical Methods, 2nd ed., Vol. 1 (DHEW/ NIOSH Pub. No. 77-157-A). 

National Institute for Occupational Safety and Health, Cincinnati, OH, 1977. pp. 239-1-239-21. 8.5. Asbestos, Code of Federal Regulations 29 CFR 1910.1001. 1971. 8.6. Occupational Exposure to Asbestos, Tremolite, Anthophyllite, and Actinolite. Final How To Remove Asbestos Siding Rule, Federal Register 51:119 (20 June 1986). pp. 22612-22790. 8.7. 

Asbestos, Tremolite, Anthophyllite, and Actinolite, Code  of Federal Regulations 1910.1001. 1988. pp 711-752. 8.8. How To Remove Asbestos Siding Criteria for a Recommended Standard -- Occupational Exposure to Asbestos (DHEW/NIOSH Pub. No. HSM 72-10267), National Institute for Occupational Safety and Health NIOSH, Cincinnati,OH. 

Leidel, N.A., Bayer,S.G., Zumwalde, R.D.,Busch, K.A., USPHS/NIOSH Membrane Filter How To Remove Asbestos Siding Method for Evaluating Airborne Asbestos Fibers (DHEW/NIOSH Pub. No. 79-127). National Institute for Occupational Safety and Health, Cincinnati, OH.

Applications of Optical Microscopy in Analysis of Asbestos and Quartz, Analytical How To Remove Asbestos Siding Techniques in Occupational Health Chemistry, edited by D.D. Dollberg and A.W. Verstuyft. Wash. D.C.: American Chemical Society, (ACS Symposium Series 120) 1980. pp. 13-41. 

Quality Control The OSHA asbestos regulations require each laboratory to establish a quality control program. The following is presented as an example of how the OSHA-SLTC constructed its internal curve as part of meeting this requirement. Data is from How To Remove Asbestos Siding samples collected during OSHA compliance inspections and analyzed from October 1980 through April 1986. 

Each sample was counted by 2 to 5 different counters independently of one another. The standard deviation and the statistic was calculated for each sample. This How To Remove Asbestos Siding data was then plotted on a graph of vs. fibers/mm(2). A least squares regression was performed using the following equation: where: Application of least squares gave: 

Using these values, the equation becomes: Sampling Pump Flow Rate Corrections This How To Remove Asbestos Siding correction is used if a difference greater than 5% in ambient temperature and/or pressure is noted between calibration and sampling sites and the pump does not compensate for the differences. 

(For Equation D, ) Where: Q(act) = actual flow rate Q(cal) = calibrated flow rate (if a rotameter was used, the rotameter value) P(cal) = uncorrected air pressure at calibration P(act) = uncorrected air pressure at sampling site T(act) = temperature at How To Remove Asbestos Siding sampling site (K) T(cal) = temperature at calibration 

Graticule When ordering the Graticule for asbestos counting, specify the exact disc diameter needed to fit the ocular of the microscope and the diameter (mm) of the circular counting area. Instructions for measuring the How To Remove Asbestos Siding dimensions necessary are listed: (1) 

Insert any available graticule into the focusing eyepiece and focus so that the graticule lines are sharp and clear. (2) Align the microscope. (3) Place a stage micrometer on the microscope How To Remove Asbestos Siding object stage and focus the microscope on the graduated lines. (4) Measure the magnified grid length, PL (um), using the stage micrometer. 

Remove the graticule from the microscope and measure its actual grid length, AL (mm).  This can be accomplished by using a mechanical stage fitted with verniers, or a jeweler's loupe with a direct reading scale. (6) Let D = 100 um. Calculate the  How To Remove Asbestos Sidingcircle diameter, d(c)(mm), for the Walton-Beckett graticule and specify the diameter when making a purchase.

Each eyepiece-objective-reticle combination on the microscope must be calibrated. Should any of the three be changed (by zoom adjustment, disassembly, replacement, etc.), the  How To Remove Asbestos Siding combination must be recalibrated. Calibration may change if interpupillary distance is changed. 

Measure the field diameter.acceptable range: 100 plus or minus 2 um) with a stage micrometer upon receipt of the graticule from the manufacturer. Determine the How To Remove Asbestos Siding field area. The Graticule is available from: Graticules Ltd., Morley Road, Tonbridge TN9 IRN, Kent, England (Telephone 011-44-732-359061). 

Also available from PTR Optics Ltd., 145 Newton Street, Waltham, MA 02154 [telephone (617) 891-6000] or McCrone Accessories and How To Remove Asbestos Siding Components, 2506 S. Michigan Ave., Chicago, IL 60616 [phone (312)-842-7100]. The graticule is custom made for each microscope. Counts for the Fibers in the Figure.

Toxic Mold

Mold gradually destroy the things they grow on. Prevent damage to building materials and furnishings, save money, and avoid potential health risks by controlling moisture and eliminating mold growth Concern about indoor exposure to mold has been increasing as the public becomes aware that exposure  read more..

How To Strip Lead Paint Off Wood

Methods for Removing Lead Paint Mechanical Methods: Mechanical (abrasive) methods of treating lead-painted surface shave two major drawbacks. They produce high levels of dangerous residue, and they have potential to damage the underlying substrate.SCRAPING: Traditional scraping with hand tools is a   read more..

Mask The Smell Of A Dead Animal Under The House

Step 4. Determine if young are involved After finding the main entry you need to verify that no young are inside before proceeding with the eviction process. Because each situation and each animal is different, do this even if it seems early or late in the year for young to be present. Failing to do  read more..

Repair Audio Amplifiers

There are two different ways that MnO2 promotes self-healing. First, there is a thermodynamic tendency for oxygen in the dielectric to slowly diffuse into the pure tantalum substrate metal that supports it. This tendency is encouraged, exponentially, Electronic Restoration Repair Audio Amplifiers by temperature and the presence of  read more..

Remove House Fire Smoke Odor From Clothes

In areas where fires are likely to occur, state and local public health agencies should consider running pre-season public service announcements (PSAs) or news releases to advise the public on how to prepare for the fire season. PSAs should be simple (e.g., the season for wildfires is approaching; t  read more..

How To Become An Emergency Planner

Many garage doors can be reinforced at their weakest points. Retrofitting your garage doors involves installing horizontal bracing onto each panel. This horizontal bracing can be Emergency Board up How To Become An Emergency Planner part of a kit from the garage door manufacturer. You may also need heavier hinges and stronger center supp  read more..

Lead Paint Abatement And Lead Paint Mitigation In

Lead paint removal, lead paint abatement and lead paint mitigation in New York City Rehabilitation, restoration, and maintenance Lead Paint Removal Lead Paint Abatement And Lead Paint Mitigation In projects frequently address old painted surfaces that require preparation and refinishing. In many cases, old lead-based paint is pre  read more..

Grants For Flood Victims

You can protect the furnace,water heater, washer, and dryer from shallow flooding with a low flood wall built around the appliance. a concrete or wooden wall 1 or Flood Damage Grants For Flood Victims  2 feet high can stop low-level flooding. The wall should be waterproofed with plastic sheeting or waterproofing comp  read more..

Wind Damage Insurance Roof Claim

DAMAGING WINDS What are damaging winds? Damaging winds are often called "straight-line” winds to differentiate the damage they cause from tornado damage. Strong thunderstorm winds can come from a number of different processes. Most thunderstorm winds that cause damage at the ground are a result o  read more..

How To Maintain Humidity In A Home

Uncontrolled moisture indoors can cause major damage to the building structure, Dehumidification How To Maintain Humidity In A Home as well as to furnishings and to finish materials like floors, walls, and ceilings. Uncontrolled moisture can trigger mold growth which not only damages the school facility, but can lead to health and perf  read more..